Page 16
GPS Chart 150C
accurately. It also scrolls the desired option in the menu page(s). It allows to exit from
Home mode to Cursor mode. When into menu pages moving it to right selects the
desired option, as “ENTER”, moving it to the left exits from menu, as “CLEAR”.
The
key
Press “ENTER” to select the desired option or to confirm selection.
The
key
Press “CLEAR” to set Home mode. Also press “CLEAR” to exit from menu or data
windows or to leave a menu without making changes, to abort selected function or to
step backward from a selection made in the menu.
The
key
Selects the Main Menu. When in menu mode, moving the ShuttlePoint knob to the right
enters a selection, moving the knob to the left clears the function.
If pressing “MENU” for 3 seconds from map display activates Edit mode to choose
data to be shown in General, 1 Line Small, 1 Line Large, 2 Lines Small, Highway or
Compass windows.
If pressing “MENU” for 3 seconds from Data pages (Navigation, Highway, GPS
Status, NMEA Display) allows to customize all data fields shown in the selected page.
The
key
Allows the user to select a Destination point (Target) at the cursor or a saved Route
or Mark.
The
key
Places Mark under the cursor position (in Home mode Mark is placed under the ship's
position).
The
key
Places Waypoints to make Routes.
The
key and Lamp/Contrast
Press “PWR” to turn the chart plotter On. Press and hold “PWR” down (once the chart
plotter has been turned On) for 3 seconds turns the chart plotter Off.
Press and immediately release “PWR” to adjust light and contrast of the display.
The
key
Sets MOB (Man OverBoard).
C-CARD slot
.
Summary of Contents for CP150C
Page 1: ...CP150C GPS Chart plotter Owner s Manual ...
Page 72: ......
