GPS Chart 150C
Page 37
Naming Route: Place cursor on Wa “ENTER” + “ENTER” +
NAME + “ENTER”
Use the ShuttlePoint knob to insert the Route name and press “ENTER”.
Selecting Route Color: Place cursor on Wa “ENTER” +
“ENTER” + COLOR + “ENTER”
A window with 8 different colors appears, use the ShuttlePoint knob to select the
preferred color and press “ENTER”.
Reversing Route: Place cursor on Wa “ENTER” + “ENTER”
+ “ENTER”
Reversing a Route plan is most typically used to return to the point where the Route
originally started.
Deleting Route: Place cursor on Wa “ENTER” + “ENTER” +
CLEAR + “ENTER”
A window is opened: select YES and press “ENTER” to confirm (select NO and press
“ENTER” otherwise).
Changing Speed & Fuel values: Place cursor on Wa “ENTER” + REPORT
+ “ENTER” + SPEED/FUEL + “ENTER”
It is possible to modify the Speed and Fuel consumption values, respectively by
selecting SPEED and FUEL. Insert value by using the ShuttlePoint knob and pressing
“ENTER”.
NOTE
Speed and fuel are made by the user to assist in estimating approximate travel time
and fuel consumption for each Route.
3.8.6 User Points List page (Information on Waypoints)
"MENU" + USER POINTS LIST + "ENTER"
Figure 3.8.6 - User Points List page
Summary of Contents for CP150C
Page 1: ...CP150C GPS Chart plotter Owner s Manual ...
Page 72: ......
