Page 74
Owner’s Manual
3. Tap on
CURSOR
.
4. The CPN Series Chart Plotter now navigates from your current position to the location
selected at step 1. A bearing line between the vessels location and the destination point
is shown. A popup window shows the Distance (DST) and Bearing (BRG) from the
vessel’s location to the destination point
(see B and C)
.
5. The CPN Series Chart Plotter is in Cursor Mode; to switch to Home Mode press the
key so the vessel will stay in the center of the page.
It will also automatically switch to Home Mode after the timeout set in Home Mode Revert.
6. Soft Keys are also shown that allow you to quickly switch to the Highway page or to stop
navigation.
7. To stop navigation, press the
key and a Warning window is shown. Tap on
.
2.8.2
GOTO A ROUTE
After you have created a few Routes, you can choose one of them to GOTO.
Using
to Select a Route
1. Tap on an open position (no buoy, warning etc. under the cursor) on the Chart page.
2. Press the
key to show the GOTO popup window
(see A)
.
If you place cursor over a cartographic object the GOTO popup window will be shown too. The only
situation when GOTO will not show this popup window but will start navigation straight away is when the
cursor is over a User Point. In such a case the navigation will be started directly to the selected User Point.
The
key will not work when a warning, alarm etc. window is displayed on the screen.
3. Tap on
ROUTE
.
4. The SELECT ROUTE window will be shown
(see B)
.
5. Select the desired Route by moving the
ShuttlePoint knob up/down or turning the
rotary knob to left/right or touching the scroll bar up/down and tap on it.
Summary of Contents for CPN1010i
