CPN700i and CPN1010i Multimedia Chart Plotters
Page 77
function can be setup to lay down a Track for a predetermined time or distance interval. If
you have a fast-moving boat you may want to setup the CPN Series Chart Plotter to record
a Track point every 0.5Nm or if you have a sail boat you may want to setup to lay down a
Track point once every 1 minute.
To set the time or distance interval you should follow the procedure:
1. Press the
key, tap on
User Points
.
2. Tap on
TRACK
. The Track menu appears.
3. Tapping on
STEP UNIT
selects between
Dist
or
Time
.
4. Tap on
DISTANCE
or
TIME
step interval.
5. Tap on the desired step value and tap on it.
6. Press the
key or tap on
in the Track window to exit the menu.
When using the Tracking feature you will notice every time a Track Point is laid down on the
Chart page a small filled in circle is shown on the Track line.
If you move the cursor over the top of the circle a popup window will be shown with the Time,
Water Temperature, Speed and Course Over Ground (COG). This is very useful if you are
fishing and want to review the conditions where the fish were being caught.
2.10.1 SAVING AND STARTING A NEW TRACK
A Track can be saved and retained in memory when the power is turned off. To start a new
Track:
1. Press the
key, tap on
User Points
.
2. Tap on
TRACK
.
3. Tap on
ACTIVE TRACK
.
4. Enter the next Track number using the touchscreen keyboard. Tap on
to select
the new Track.
5. Tap on
TRACKING
to start laying down Track Points.
6. Tap on
to exit the menu to the Chart page.
Summary of Contents for CPN1010i
