CPN700i and CPN1010i Multimedia Chart Plotters
Page 79
5. Press
the
key one time so yellow highlight is removed from the data window.
Resetting the Trip Log
When Trip Log is selected in one of the data windows and you want to reset the Log:
1. Press and hold
the
key until a field is highlighted (it will be shown in a yellow frame).
2. Tap on
TLOG
.
3. A menu popup window will be shown. Tap on
RESET
.
4. A Warning window will be shown to confirm if you want to reset the Trip Log. Tap on
.The Trip Log is now reset.
6. Press
the
key two times to store and exit the editing mode.
2.11.2 COUNT DOWN TIMER SELECTION IN DATA WINDOW
On the Chart, Navigation, Highway and NMEA Data pages the windows may be customized
to show a Count Down Timer (HH:MM:SS).
1. Select one of the pages listed above, press and hold
the
key. You will notice one
of the data boxes will be highlighted in yellow.
2. Tap on the yellow highlighted window to show the menu popup window.
3. Tap on
NAVIGATION
.
4. Tap on
Count Down Timer (CDT)
(see A)
.
5. On the selected data box CDT appears
(see B)
. Press
the
key one time so yellow
highlight is removed from the data window.
You can insert the desired starting value and then start the timer (see the following
paragraph
“Setting the Count Down Timer”
). Once the timer reaches the 00:00:00, a pop-
up Warning window is shown and an audible alarm sounds (only if the Audible Alarm option
is set On, see Par. 2.13.10
“Alarms”
): tap on
to close the Warning window. The counter
value is reset to the previously set starting value.
Summary of Contents for CPN1010i
