GX1000S
Page 18
[
16/9
]
Key
Immediately recalls channel 16 from any channel location. Holding down
this key recalls channel 9. Pressing the [
16/9
] key again reverts to the
previous selected working channel.
Secondary use
Press and hold the [
16/9
] key then press the [
WX
] key to switch the Chan-
nel Group.
KEYPAD
[
S
]/[
T
] Keys
The [
S
] and [
T
] keys are used to select a desired channel and to
select items in the DSC OPERATION and SETUP menus.
[
SCAN
(
MEM
)] Key
Press this key to start and stop the scanning of programmed channels.
Refer to section “
10.11 SCANNING
” for details.
Secondary use
To program a channel into scan memory, select the channel and press
and hold the [
SCAN
(
MEM
)] key until “
MEM
” is shown on the display.
To delete a memorized channel from scan memory, select the channel
and press and hold the [
SCAN
(
MEM
)] key until “
MEM
” is removed
from the display.
[
CALL
(
SET
)
MENU
] Key
Press the [
CALL
(
SET
)
MENU
] key to access the DSC OPERATION
menu. The “
INDIVIDUAL CALL
INDIVIDUAL CALL
INDIVIDUAL CALL
INDIVIDUAL CALL
INDIVIDUAL CALL
,” “
GROUP CALL
GROUP CALL
GROUP CALL
GROUP CALL
GROUP CALL
,” and “
ALL SHIPS CALL
ALL SHIPS CALL
ALL SHIPS CALL
ALL SHIPS CALL
ALL SHIPS CALL
”
functions can be accessed from the DSC OPERATION menu.
NOTE
: Before the DSC OPERATION menu can be selected an MMSI
must be entered. Refer to section “
11.2 MARITIME MOBILE SER-
VICE IDENTITY
(
MMSI
).”
Secondary use
Press and hold the [
CALL
(
SET
)
MENU
] key to access the “
RADIO
RADIO
RADIO
RADIO
RADIO
SETUP
SETUP
SETUP
SETUP
SETUP
” (refer to section “
12 RADIO SETUP MODE
”) or “
DSC SETUP
DSC SETUP
DSC SETUP
DSC SETUP
DSC SETUP
”
menu (refer to section “
11 DIGITAL SELECTIVE CALLING
”).
[
DISTRESS
]
Key
Used to send a DSC Distress Call. To send the distress call refer to section
“
11.3.1
(
Transmitting A DSC Distress Call
).”
DC INPUT CABLE
Connects the radio to a DC power supply capable of delivering 12V DC.
