GX1000S
Page 34
11.5 INDIVIDUAL CALL
This feature allows the
GX1000S
to contact another vessel with a DSC VHF
radio and automatically switch the receiving radio to a desired communica-
tions channel. This feature is similar to calling a vessel on CH16 and request-
ing to go to another channel (switching to the channel is private between the
two stations).
NOTE
The
GX1000S
can store up to 15 individual stations.
11.5.1 Setting up the Individual / Position Call Directory
The
GX1000S
has a DSC directory that allows you to store up to 15 of vessel’s
or person’s name and the MMSI number associated with vessels you wish to
transmit Individual calls, Position Requests and Position Send transmissions.
To transmit an Individual call you must program this directory with information
of the persons you wish to call, similar to a cellular phone telephone directory.
1. Press and hold down the [
CALL
(
SET
)
MENU
] key
until “
RADIO SETUP
RADIO SETUP
RADIO SETUP
RADIO SETUP
RADIO SETUP
” menu appears.
2. Press the [
T
] key to select “
DSC SETUP
DSC SETUP
DSC SETUP
DSC SETUP
DSC SETUP
” menu.
3. Press the [
CALL
(
SET
)
MENU
] key, then select
“
INDIV DIR
INDIV DIR
INDIV DIR
INDIV DIR
INDIV DIR
” with the [
T
]/[
S
] keys.
4. Press the [
CALL
(
SET
)
MENU
] key, then select
“
ADD
ADD
ADD
ADD
ADD
” with the [
T
]/[
S
] keys.
5. Press the [
CALL
(
SET
)
MENU
] key.
6. Press the [
T
]/[
S
] keys to scroll through the first
letter of the name of the vessel or person you want
to reference in the directory.
7. Press the [
CALL
(
SET
)
MENU
] key to store the first
letter in the name and step to the next letter to the
right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to eleven characters.
If a mistake was made entering in the name, re-
peat pressing the [
SCAN
(
MEM
)] key until the
wrong character is selected, then enter the correct character.
9. After the name has been entered, press and hold the
[
CALL
(
SET
)
MENU
] key to advance to the MMSI Mari-
time Mobile Service Identity Number.
10. Press the [
T
]/[
S
] keys to scroll through numbers, 0-9.
To enter the desired number and move one space to the right press the
