55
10.6.2 Receiving a Position Request
When a position request call is received from another vessel, a ringing alarm
will sound and “
POS REQUEST
” will be shown in the LCD.
1. When a position request call is received, the trans-
ceiver will transmit your position to the vessel who
requested it.
RX POS REQUEST
YAESU
POS REPLY
SINCE: 00:05
[ Transmitted ]
QUIT
2. To exit from position request display, press the
[
QUIT
] soft key.
10.6.3 Setting up the Position Request Ringer
The transceiver has the capability to turn off the position request ringer.
1. [
]
“
SETUP
”
“
DSC SETUP
”
“
DSC BEEP
”
2. Select “
POS REQUEST
” with the [▲] or [▼] key,
then press the [
SELECT
] soft key.
BACK
SELECT
DSC BEEP
INDIVIDUAL
GROUP
ALL SHIPS
POS REQUEST
ON
ON
ON
OFF
3.
Press the [▲] or [▼] key to select “
OFF
”, then
press the [
ENTER
] soft key.
BACK
ENTER
POS REQUEST
OFF
ON
4. Press the [
16/S
] key or press the [
CLR
] soft key to return to radio opera
-
tion mode.
If you wish to return to enabling the ringer tone, just repeat the above procedure,
pressing the [▲] or [▼] key to select “
ON
” in step 3 above.
10.7 POSITION REPORT
The feature is similar to the position request, however instead of requesting
a position of another vessel this function allows you to send your position to
another vessel. In order to send your position you need to have a GPS receiver
connected or to have manually input your position. See section “
9.9 MANUAL
INPUTTING OF THE GPS LOCATION
.”
Summary of Contents for ECLIPSE
Page 96: ......
