75
4.
Press the [▲] or [▼] key to select the desired key
function, then press the [
ENTER
] soft key.
Refer to the next page for available functions.
BACK
ENTER
KEY SELECTION
NONE
WX/CH
SCAN
DW/TW
5. Repeat steps 3 and 4 to assign up to 6 functions.
6. To exit this MENU and return to radio operation press the [
BACK
] soft key.
Available functions are:
DISPLAY
SOFT KEY ICON
FUNCTION
SOFT KEY NUMBERS
ASSIGNED AS DEFAULT
(See the previous page.)
NONE
−
−
−
WX/CH
Switches channels between
weather and marine
01
(GX1400GPS, GX1400)
SCAN
Turns the scanning function
ON or OFF
05
SCAN MEMORY
Add or remove channels
from memory channel scan
04
DW/TW
Starts and stops dual watch
or triple watch scan
06
PRESET
Programs or deletes the pre-
set memory channel
10
(GX1400GPS, GX1400)
01
(GX1400GPS/E)
TX HI/LO
Selects transmit power
02
Selecting How Long the Soft Keys are Shown
1. [
]
“
SETUP
”
“
CONFIGURATION
”
“
SOFT KEY
”
2.
Press the [▲] or [▼] key to select “
KEY TIMER
”,
then press the [
SELECT
] soft key.
BACK
SELECT
SOFT KEY
KEY ASSIGNMENT
KEY TIMER
3.
Press the [▲] or [▼] key to select how long the
soft key icon will be shown on the display after a
soft key is pressed, then press the [
ENTER
] soft
key.
4. The showing time can be set to “
3 sec
”, “
5 sec
”,
“
7 sec
”, “
10 sec
”, or “
15 sec
”.
BACK
ENTER
KEY TIMER
3 sec
5 sec
7 sec
10 sec
5. To exit this MENU and return to radio operation press the [
BACK
] soft key.
Summary of Contents for ECLIPSE
Page 96: ......
