40
3.
Press the [▲] or [▼] key to select “
OFF
”, then
press the ENTER soft key.
BACK
ENTER
ALL SHIPS
OFF
ON
4. Press the [
16/S
] key or press the [
CLR
] soft key to return to radio opera
-
tion mode.
If you wish to return to enabling the ringer tone, just repeat the above procedure,
pressing the [▲] or [▼] key to select “
ON
” in step 3 above.
10.4 INDIVIDUAL CALL
This feature allows the
GX1400
series to contact another vessel with a DSC VHF
radio and automatically switch the receiving radio to the desired communica-
tions channel. This feature is similar to calling a vessel on CH16 and requesting
to go to another channel (switching to the channel is private between the two
vessels). Up to 60 individual contacts may be programmed.
10.4.1 Setting up the Individual / Position Call Directory
The transceiver has a DSC individual directory that allows storing vessels or persons
names and the associated MMSI numbers you may wish to contact via individual
calls, auto polling, position request, position report, and polling transmissions.
To transmit an individual call, you must program this directory with information of the
persons you wish to call, similar to a cellular phone contact list.
1. [
]
“
SETUP
”
“
DSC SETUP
”
“
INDIVIDUAL DIR.
”
2. Select “
ADD
” with the [▲] or [▼] key, then press
the [
SELECT
] soft key.
BACK
SELECT
INDIVIDUAL DIR.
ADD
EDIT
DELETE
3. Select “
NAME
” with the [▲] or [▼] key, then press
the [
SELECT
] soft key.
BACK
SELECT
ADD
NAME:
------------
MMSI:
---------
4.
Press the [▲] or [▼] key to scroll to the first letter
of the name of the vessel or person you want to
list in the directory.
BACK
SELECT
FINISH
ADD
NAME:
Y
-----------
5. Press the [
SELECT
] soft key to store the first letter
of the name and step to the next letter to the right.
Summary of Contents for ECLIPSE
Page 96: ......
