41
6. Repeat steps 4 and 5 until the name is complete.
Press the [
►]
key to move to the next space if you want to enter a blank
space in the name.
If a mistake was made entering in the name, press the
[◄] or [►] key
repeatedly until the wrong letter is highlighted, then press the [▲] or [▼]
key to correct the entry.
7. After the twelfth letter or space has been entered,
press the [
FINISH
] soft key to return to the previ
-
ous screen.
ADD
NAME:
YAESU-------
MMSI:
---------
BACK
SELECT
FINISH
BACK
SELECT
FINISH
ADD
MMSI:
3
--------
8. Select “
MMSI
” with the [▲] or [▼] key, then press
the [
SELECT
] soft key.
9.
Press the [▲] or [▼] key to scroll through numbers,
0 to 9.
10. Press the [
SELECT
] soft key to store the number
and step to the next digit to the right.
11. Repeat steps 9 and 10 until the MMSI is complete.
If a mistake was made entering in the MMSI number, press the [◄] or [►]
key repeatedly until the wrong number is highlighted, then press the [▲]
or [▼] key to correct the entry.
12. After the ninth number has been entered, press the
[
FINISH
] soft key to return to the previous screen.
ADD
NAME:
YAESU-------
MMSI:
366901555
BACK
SELECT
FINISH
13. Press the [
FINISH
] soft key to save the entered
address.
14. To enter another individual address, repeat steps 2 through 13.
15. Press the [
16/S
] key or press the [
CLR
] soft key to return to radio opera
-
tion mode.
10.4.2 Setting up Individual Call Reply
This menu item sets up the radio to manually (default setting) or automatically
respond to a DSC individual call requesting you to switch to a working channel
for voice communications. When “MANUAL” is selected the MMSI of the calling
vessel is shown allowing you to see who is calling. This function is similar to
caller ID on a cellular phone.
1. [
]
“
SETUP
”
“
DSC SETUP
”
“
INDIVIDUAL REPLY
”
Summary of Contents for ECLIPSE
Page 96: ......
