67
11.1.6 Auto Position Polling Call Type
The transceiver has the capability to automatically track four vessels
programmed into the individual directory. This selection allows you to select
the call type used in the auto position polling.
Refer to section “
10.9.1 Setting up the Polling Call Type
11.1.7 Auto Position Polling Interval Time
The transceiver has the capability to automatically track four vessels
programmed into the individual directory. This selection allows you to select
time interval between polling call transmissions.
Refer to section “
10.9.2 Setting up the Polling Time Interval
” for setting.
11.1.8 Auto Channel Switching Time
When a DSC distress call or an all ships call (urgency or safety) is received,
the transceiver will automatically switch to the channel 16.
This MENU selection allows the automatic switching time to be changed.
1. [
]
“
SETUP
”
“
DSC SETUP
”
“
AUTO CH CHANGE
”
2.
Press the [▲] or [▼] key to select the desired
time, then press the [
ENTER
] soft key. The switch
-
ing time can be set to “OFF”, “10 sec”, “30 sec”,
“1 min”, “2 min”, “5 min” or “10 min”.
BACK
ENTER
AUTO CH CHANGE
OFF
10 sec
30 sec
1 min
3. Press the [
CLR
] key to return to radio operation.
11.1.9 DSC Beep
This feature allows the alarm beeps to be turned on (default setting) or off when
a DSC call is received. The DSC calls that can be customized are: individual,
group, all ships, position request, position report call.
Refer to section “
10.5.4 Setting up the Group Call Ringer
” for setting.
11.2 CHANNEL SETUP
11.2.1 Channel Group (Band Selection)
This selection allows you to change the channel group from International to
USA or Canada.
Refer to section “
Summary of Contents for ECLIPSE
Page 96: ......
