Page 33
HX760S
e
c
f
h
d
g
10. Press
PTT
switch of the
HX760S
to exit the
HX760S
to normal operation.
11. Turns both
BH-2
and
HX760S
off.
7.2 CONTROLS AND SWITCHES
i
j
c
Microphone
d
LED Indicator
Blinking Blue: The
BH-2
is correctly recognized by the
HX760S
.
Blinking Red: The
BH-2
is not correctly recognized by the
HX760S
.
LED color is Red and Blue: The battery voltage of the
BH-2
is Low.
e
POWER
( ) Switch
Turns the
BH-2
on and off.
To turn the
BH-2
on, press and hold this switch until the
BH-2
’s LED indi-
cator glows red, and the beeper sounds a high pitch tone (approximately
three seconds).
To turn the
BH-2
off, press and hold this switch until the beeper sounds
two brief tones (emit the one low pitch tone and then one high pitch tone),
and the
BH-2
’s LED indicator glows red (approximately five seconds).
f
VOLUME
(
–
) Switch
Pressing this switch decrease the receiver volume level.
Secondary use:
Press this switch while pressing and holding the
PTT
switch, to decreases
the microphone gain of the
BH-2
.
