Standard SD462 Operator'S Manual Download

Page: 148 / 558

Printing Functions

132

Recalling a Program

Place the originals.

Press the

{

Program

}

key.

The stored settings are displayed.

Note

❒

Program numbers displayed
with

next to them already

have settings.

Press the number of the program
you want to recall.

Press the

{

Start

}

key.

Changing a Stored Program

Edit the print settings so all func-
tions you want to store in this pro-
gram are selected.

Press the

{

Program

}

key.

Press

[

Program

]

Press the program number you
want to change.

A confirmation dialog box will ap-
pear.

Press

[

Yes

]

Repeat steps

and

of “Storing a

program”.

Changing a Program Name

Press the

{

Program

}

key.

Press

[

Change Name

]

Press the program number you
want to change the name.

Enter the new program name us-
ing the letter keys on the display
panel.

Press

[

]

Protecting a Program

If you want to prevent someone from
writing over your program, do the
following.

Note

❒

If all the user programs have been
protected, you cannot store any
setting in program menu.

Press the

{

Program

}

key.

Press

[

Protect

]

Press the number of the program
you want to protect.

Note

❒

Already protected program num-
ber are shown in highlight.

Summary of Contents for SD462












































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SD462

Reviews:

Related manuals for SD462

Brands by name

Popular brands

Standard SD462, Operator'S Manual

Search results

Summary of Contents for SD462

Reviews:

Related manuals for SD462

Brands by name

Popular brands