GX2000/GX2100
Page 114
17 CMP30
(
RAM3
)
REMOTE MIC OPERATION
When the Remote MIC is connected to the
GX2000/2100
, all VHF, DSC, setup
menus, AIS, Waypoint, Compass functions and PA/Fog modes can be remotely
operated. The
CMP30
’s operation is same as
GX2000/GX2100
except the
receiver audio volume setting and squelch level setting. The reason for the
same operation is to make the operation of the radio and
CMP30
mic easy. For
specific operation of the
CMP30
mic review sections in the radio manual. The
CMP30
is supplied with 23 feet (7 m) of routing cable and can be extended up
to 70 feet (21 m) using three 23-foot extension cables model
CT-100
. The
Intercom feature can be used between the
CMP30
and the
GX2000/2100
. In
addition, speaker wires are supplied at the panel mount of the routing cable for
external speakers to be connected in noisy environments.
17.1 REMOTE MIC CONTROLS
[
H/L
]
KEY
Toggles between high and low power. When the [
H/L
] key is pressed while
the transceiver is on CH13 or CH67, the power is temporarily switched
from LO to HI until the
PTT
switch is released. The [
H/L
] key does not
function on transmit inhibited and low-power only channels.
Summary of Contents for GX2000
Page 113: ...Page 113 GX2000 GX2100 MEMO ...
Page 133: ...Page 133 GX2000 GX2100 MEMO ...
Page 134: ...GX2000 GX2100 Page 134 MEMO ...
