GX2000/GX2100
Page 116
[
CLR/WX
] Key
Press to CLEAR a function or menu selection. Press and hold to select
NOAA Weather channels. Press and hold again to exit Weather mode
and revert to radio mode.
Secondary use
Hold down the [
16/9
] key while pressing the [
WX
] key to change the
mode from USA to International or Canadian.
[
ENT
] Key
This key functions as the enter key.
SPEAKER
The internal speaker is located here.
[
DISTRESS
]
KEY
Used to send a DSC Distress call. Refer to section “
11 DIGITAL SELEC-
TIVE CALLING
”.
17.2 ASSIGNING SOFT KEYS
This menu item allows selection of the number of soft keys, soft key selection
and how long the display will show the soft key icon after a soft key is pressed.
The keys maybe setup to control the following functions:
1. Press and hold down the [
CALL/MENU
] key
until “
Setup Menu
” appears, then select “
GEN-
ERAL SETUP
” with the [
] or [
] key.
2. Press the [
SELECT
] soft key, then press the
[
] key to select “
SOFT KEY
”.
3. Press the [
SELECT
] soft key, then press the [
]
key to select “
NUMBER OF SOFT KEYS
”.
4. Press the [
SELECT
] soft key, then press the
[
] or [
] key to select the number of soft keys
(3 through 10).
5. Press the [
ENT
] soft key, then press the [
] key to
select “
KEY ASSIGNMENT
” (to change the use of se-
lected soft keys). Then press the [
SELECT
] soft
key.
6. Press the [
] or [
] key to select the key
(“
KEY1
”, “
KEY2
”, “
KEY3
” etc), and press the
[
SELECT
] soft key. Then press the [
] or [
]
key to select the new function to be assigned,
and press the [
ENT
] soft key. Available func-
tions are listed next page. Repeat step 6 to
Summary of Contents for GX2000
Page 113: ...Page 113 GX2000 GX2100 MEMO ...
Page 133: ...Page 133 GX2000 GX2100 MEMO ...
Page 134: ...GX2000 GX2100 Page 134 MEMO ...
