GX2000/GX2100
Page 78
11.12 DSC TEST
This function is used to contact another DSC equipped vessel to ensure the
DSC functions of the radio are operating.
NOTE
To use this feature, the radio you will be transmitting the test call to
needs to have the DSC Test feature.
To perform the DSC test you will need to enter a MMSI of another vessel into
the Individual directory or manually enter in the MMSI using the procedure
below.
11.12.1 Programming MMSI into Individual Directory
Refer to section “
11.5.1 Setting up the Individual / Position Call Directory
”.
11.12.2 DSC Test call by using Individual Directory
1. After programming a individual MMSI into the
GX2000/GX2100
(refer to
section “
11.5.1 Setting up the Individual / Position Call Directory
”).
2. Press the [
CALL
(
MENU
)] key. The “
DSC
Menu
” will appear.
3. Rotate the
CHANNEL
knob to select “
DSC
TEST
”, then press the [
SELECT
] soft key.
4. Rotate the
CHANNEL
knob to select the Ship name
and press the [
SELECT
] soft key.
5. Press the [
YES
] soft key to transmit the DSC
test call to the other vessel.
NOTE
After the radio receive a Test Call reply from ves-
sel that was called, the radio will ring and show
TEST ACK display, which confirms the radio you
called received the test call.
Summary of Contents for GX2000
Page 113: ...Page 113 GX2000 GX2100 MEMO ...
Page 133: ...Page 133 GX2000 GX2100 MEMO ...
Page 134: ...GX2000 GX2100 Page 134 MEMO ...
