7
7. MAINTENANCE
Replace scratched or bent driver blades (16). Clean the machine only with a soft and
moist tissue without chemical substrates. Clean the folding rollers using a substrate that
does not dissolve rubber.
8. SECURITY
§
The machine must only be used for the stapling and folding of paper.
§
Connect machine only to an grounded power outlet. Switch off after use.
§
Make sure that the power requirement indicated at the machine’s back side is the
same being provided on your premises before connecting the power cord. Check
function of safety shut off regularly: the machine must not run with cover (5) opened.
§
Clean and service the machine only with the power cord disconnected.
§
Place on an even support and never in a humid surrounding, avoid direct sunlight.
§
Never put mugs, glasses or bottles onto the machine.
§
If you notice smoke, heat, excessive noises or any unusual performance, disconnect
the power cord immediately and call your dealer.
9. TECHNICAL DATA
Input paper sizes for booklets
DIN A5 (5 ½ x 8 ½) – A3 (11 x 17, SRA3)
Paper sizes for side or corner stapling
DIN A5 (5 ½ x 8 ½) – A4 (8 ½ x 11)
Maximum booklet size
60 pages or 15 sheets 80g paper
Maximum size of stapled blocks
30 sheets 80g paper
Stapling heads
2, upgradeable to 4 (USA: max. 3)
Staple magazine
210 staples/stapling head
Staples/Loop Staples
NAGEL 26/6 (6mm leg length)
NAGEL Ri 26/6 (6mm leg length, loop)
NAGEL 26/8S (8mm leg length, steel)
Cycle speed
User dependant up to 500 booklets/hr
Power requirements
230V AC 50Hz, 100W / 110V AC 60Hz,
100W
Weight (shipping weight)
39 kg/86 lbs. (41.5 kg/91.5 lbs.)
Dimensions (height x width x length)
11 ½” x 19 1/3” x 20”
Shipping dimensions (height x width x length)
16 1/3” x 26 2/3” x 24”
Accessories
Stand on casters
Additional stapling heads
Original NAGEL-Staples
