F- DISASEMBLY, REPAIR AND REASSEMBLY
F1- Disassembly
F2- REASSEMBLY
section M
4
.
.
9 .
Remark
90
4
0
shaft.
0
7 .
Reassemble in accordance with standard engineering practice. You may find the attached drawings useful.
Clean all the parts, replace damaged or worn-out ones.
Coat the seats and screw connections with graphite, silicon or similar slippery substance before assembly.
If you can not find any of the above you may use oil instead (except the pumps for drinking water).
Never use the old o-rings and make sure the new o-rings are the same size as the old
ones.
Reassemble the pump in reverse sequence to dismantling.
ATTENTION
