8
Attaching the Mattress Platform
Step 3:
Attach the mattress platform in the desired
position. (Before inserting the bolts, make
sure the instruction holder and the warning
label are facing up and readable as shown in
Fig 5 and the mattress platform is level.
Using (4)
3/4” (1/4”x 20 thread)
connector
bolts to attach the mattress platform. Insert
each bolt through the “L” bracket and loose-
ly start the bolt into the threaded inserts lo-
cated in the crib ends and headboard posts.
See Fig 5a.
Do not tighten the bolts at this time.
When the child is able to pull to a standing
position, set the mattress platform to the
lowest position and remove large toys and
other objects that could serve as steps for
climbing out.
Fig 6. is how your crib should look with
Warning labels facing the front of the crib.
Figure 5.
Figure 5a.
Enlarged view.
Allen wrench
3/4” (1/4”x 20 thread) Connector bolt
Figure 6.
Spring Mattress assembled to end rails & headboard.
Headboard
Higher Position
Mattress Platform
Summary of Contents for 536-x3-50 BTG
Page 2: ...2...
Page 17: ...2 ADVERTENCIA...