background image

 

12 of 12 

 

STANLEY is a registered trademark of The Stanley Works or its affiliates and are used under license by GXi Outdoor Power LLC. 

Rev

. 9/2010 

Limited Warranty & Service 

 
*LENGTH OF WARRANTY: Batteries supplied with applicable products as standard, original equipment are covered by this warranty for a period of 3 months 
(noncommercial use) or 1 month (commercial/rental use) from the date of original retail product purchase.   

Consumable parts such as batteries, oil, spark plugs, blades, belts, air filters,  carburetors, gloves, hardware bags are not covered by this warranty. 

TO QUALIFY FOR THIS WARRANTY: 

 

The product must be purchased in the United States from a dealer authorized  by GXi Outdoor Power LLC  to sell those products. This warranty applies to first retail 
purchaser / owner during the applicable warranty time period. NO WARRANTY REGISTRATION IS NECESSARY TO OBTAIN WARRANTY ON STANLEY PRODUCTS.  
SAVE YOUR PROOF OF PURCHASE RECEIPT.  IF YOU DO NOT PROVIDE PROOF OF THE INITIAL PURCHASE DATE AT THE TIME WARRANTY SERVICE IS RE-
QUESTED, THE MANUFACTURING DATE OF THE PRODUCT WILL BE USED TO DETERMINE THE WARRANTY PERIOD. 

 
WHAT STANLEY POWER EQUIPMENT WILL REPAIR OR REPLACE UNDER WARRANTY: 

 

STANLEY will repair or replace, at its option, any part that is proven to be 

defective in material or workmanship 

under normal use during the applicable 

warranty time period subject to the exclusions stated herein.  This warranty is void if the owner fails to follow the prescribed maintenance and operating proce-
dures described in this manual.  This specifically refers to ensuring routine oil changes are made, that fuel stabilizer is used for long-term storage, that the gen-
erator is not overloaded, and that the generator loads are distributed evenly between the A and B outlets. 
 
STANLEY has the right to recover warranty administration costs from the owner if the root cause of the malfunction was found to be other than defective mate-
rial or workmanship.  In particular, this warranty does not cover: contaminants in the fuel or oil; damage caused by not following the prescribed warnings and 
operating practices; failure to follow proper maintenance and storage procedures; and physical damage due to shipping or handling or storage. Damage to the 
generator that occurs as a result of connecting a STANLEY generator to household wiring without the use of a UL approved transfer switch device that is con-
nected to the home or business and grounded as per applicable local electrical codes, is not covered by this warranty.   
 
Warranty repairs will be made without charge for parts and labor for the first year.  After the first year, this limited warranty covers the costs of replacement 
parts only.  

 

Anything replaced under warranty becomes the property of STANLEY.   Parts replaced under warranty will be considered as part of the original prod-

uct and any warranty on those parts will expire coincident with the original product warranty.  

TO OBTAIN WARRANTY SERVICE: 

 

You must take the STANLEY Power Equipment product, accessory, replacement part, apparel or the power equipment on which the accessory or replacement part 
is installed, and proof of purchase, at your expense, to any STANLEY Power Equipment service location in the United States, who is authorized to service that 
product, during the service location’s normal business hours. If you are unable to obtain warranty service, or are dissatisfied with the warranty service you receive, 
take the following steps: First, contact the manager of the service center involved; normally this will resolve the problem. However, if you should require further 
assistance, write or call the STANLEY Customer Service.  

EXCLUSIONS: 

 

THIS WARRANTY DOES NOT EXTEND TO PARTS AFFECTED OR DAMAGED BY ACCIDENT AND/OR COLLISION, NORMAL WEAR, FUEL CONTAMINATION, USE IN 
AN APPLICATION FOR WHICH THE PRODUCT WAS NOT DESIGNED OR ANY OTHER MISUSE, NEGLECT, INCORPORATION OR USE OF UNSUITABLE ATTACH-
MENTS OR PARTS, UNAUTHORIZED ALTERATION, OR ANY CAUSES OTHER THAN DEFECTS IN MATERIAL OR WORKMANSHIP OF THE PRODUCT.  

DISCLAIMER OF CONSEQUENTIAL DAMAGE AND LIMITATION OF IMPLIED WARRANTIES: 

 

STANLEY DISCLAIMS ANY RESPONSIBILITY FOR LOSS OF TIME OR USE OF THE PRODUCT, TRANSPORTATION, COMMERCIAL LOSS, OR ANY OTHER INCIDEN-
TAL OR CONSEQUENTIAL DAMAGE. ANY IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY.  
This warranty is void if the manufacturing date and the serial number on the equipment has been removed or the equipment has been modified.  

EMISSION CONTROL SYSTEM INFORMATION 

The U.S. and California Clean Air Acts  

EPA and California regulations require all manufacturers to furnish written instructions describing the operation and maintenance of emission control systems. 

The following instructions and procedures must be followed in order to keep the emissions from your STANLEY engine within the emission standards. Mainte-

nance, replacement, or repair of the emission control devices and systems may be performed by any engine repair establishment or individual, using parts that are 

‘‘certified’’ to EPA standards. 

The emission control systems on your STANLEY engine were designed, built, and certified to conform with EPA regulations. We recommend the use of genuine 

STANLEY parts whenever you have maintenance done. These original-design replacement parts are manufactured to the same standards as the original parts, so 

you can be confident of their performance. The use of replacement parts that are not of the original design and quality may impair the effectiveness of your emis-

sion control system.  A manufacturer of an aftermarket part assumes the responsibility that the part will not adversely affect emission performance. The manufac-

turer or re-builder of the part must certify that use of the part will not result in a failure of the engine to comply with emission regulations. 

Emission controls are covered by this warranty for all uses for a period of 3 years from original retail purchase date, this coverage extends to subsequent owners 

of the product with proof of original purchase. 

Summary of Contents for 2-Way Feed Chipper / Shredder













Reviews: