203820
Rev. G, 3/14/09
© 2009, THE STANLEY WORKS. ALL RIGHTS RESERVED.
4 of 15
3.
INSTRUCTIONS
3.1
Removing the Solenoid Lock Assembly
3.1.1
DE-ENERGIZE electrical power to the door package.
3.1.2
Manually SLIDE the door(s) to the open position. (If fully closed, it will be difficult for
the technician to get to the lock. See Figure 1.)
3.1.3
Refer to Figure 2, and MARK the track tube at the locking edge of the belt bracket.
3.1.4
REMOVE the fasteners securing the lock to the header, and REMOVE the lock
assembly and harness.
Figure 1. Removing the Solenoid Lock Assembly
SL001B
Figure 2. Marking the Track Tube Prior to Removing the Solenoid Lock Assembly
PAWL
(UNLOCKED)
LATCH
(RETRACTED)
LOCK
HOUSING
CAM
MARK ON TRACK TUBE AT LOCKING
EDGE OF BELT BRACKET
DOOR FULLY OPEN
SL005