203820
Rev. G, 3/14/09
© 2009, THE STANLEY WORKS. ALL RIGHTS RESERVED.
7 of 15
3.4.6
CONNECT electrical wiring to switch S3.
3.4.7
Refer to Section 3.2, and INSTALL the solenoid lock assembly into the header.
3.5
Replacing the Latch, Pawl, or Cam
3.5.1
Refer to Section 1.1, and REMOVE the solenoid lock assembly from the header.
3.5.2
Refer to Attachment 1, and REMOVE the shoulder screws, lockwashers, and nut
securing the pawl or latch and cam assembly to the housing.
3.5.3
REMOVE the pawl or latch and cam assembly from the housing.
3.5.4
POSITION the replacement pawl or latch and cam assembly into the housing.
3.5.5
THREAD the shoulder screws securing the pawl or latch and cam assembly fully down
into the housing.
3.5.6
HOLD the shoulder screw in that position, and TIGHTEN the external nut as necessary
to ensure that the shoulder screws seat firmly.
3.5.7
Refer to Section 3.2, and INSTALL the solenoid lock assembly into the header.
