OPERATION
Plug the fireplace into a 15 Amp wall socket.
MANUAL OPERATION
Plug the fireplace into a 15 Amp wall socket.
1. Press to turn on and off the fireplace.
2. Press to adjust the flame’s brightness. There are 7 brightness levels (L5 – L4 - L3 –
L2 – L1 – L0 – L6).The indicator light turns off automatically leaving it not operated within
10 seconds.
3. Press to adjust the ember bed brightness. There are 12 brightness levels (D4 – D5
– D6 – D7 – D8 – D9 – DA – DB – D0 – D1 – D2 – D3).
4. Press to set the turn-off time, 30min-1h-2h-3h-4h-5h-6h-7h-8h-t0. The indicator light
turns off automatically leaving it not operated within 10 seconds. The timing turns off
when is pressed.
5. Press to turn on and off the heater in its AUTO mode. The setting temperature
switch through 59
℉
- 61
℉
- 63
℉
- 64
℉
- 66
℉
- 68
℉
- 70
℉
- 72
℉
- 73
℉
- 75
℉
- 77
℉
- 79
℉
-
81
℉
- 83
℉
-
℉
in Fahrenheit or 15
℃
-16
℃
-17
℃
- 18
℃
- 19
℃
- 20
℃
- 21
℃
- 22
℃
- 23
℃
- 24
℃
- 25
℃
- 26
℃
- 27
℃
- 28
℃
-
℃
in Celsius. The temperature setting mode will be
closed automatically if leaving not operated for 5 seconds.
6. When the heater is on, press the for 5 seconds to switch between Celsius and
Fahrenheit.
The Fireplace operates by using either the touch panel located on the upper left hand corner
or by remote control.
9
Summary of Contents for Argon Cube
Page 18: ...EXPLODED VIEW 18 ...
