background image

BR87 User

 Manual ◄ 3

DECLARATION OF CONFORMITY ..........................................................................................................................2

SAFETY SYMBOLS ..................................................................................................................................................4

SAFETY PRECAUTIONS ..........................................................................................................................................5

TOOL STICKERS & TAGS ........................................................................................................................................7

HOSE TYPES ............................................................................................................................................................8

HOSE RECOMMENDATIONS ..................................................................................................................................9

FIGURE 1. TYPICAL HOSE CONNECTIONS .......................................................................................................9

HTMA REQUIREMENTS .........................................................................................................................................10

OPERATION ............................................................................................................................................................ 11

TOOL PROTECTION & CARE ................................................................................................................................12

TROUBLESHOOTING ............................................................................................................................................13

CHARGING THE ACCUMULATOR .........................................................................................................................14

FIGURE 2. CHARGING THE ACCUMULATOR ...................................................................................................15

SPECIFICATIONS ...................................................................................................................................................16

ACCESSORIES.......................................................................................................................................................17

SERVICE TOOLS ....................................................................................................................................................17

BR87 PARTS ILLUSTRATION ................................................................................................................................18

BR87 PARTS LIST ..................................................................................................................................................20

UNDERWATER TOOLS DEPTH GUIDELINE .........................................................................................................21

SERVICING:

 This manual contains safety, operation, and routine maintenance instructions. Stanley Hydraulic Tools 

recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an authorized 

and certified dealer. Please read the following warning. 

For the nearest authorized and certified dealer, call Stanley Hydraulic Tools at the number listed on the back of this 

manual and ask for a Customer Service Representative.

WARNING

SERIOUS INJURY OR DEATH COULD RESULT FROM THE IMPROPER REPAIR OR 

SERVICE OF THIS TOOL.

REPAIRS AND / OR SERVICE TO THIS TOOL MUST ONLY BE DONE BY AN 

AUTHORIZED AND CERTIFIED DEALER.

TABLE OF CONTENTS

IMPORTANT

To fill out a Product Warranty Validation form, and for information on your warranty, 

 

visit Stanleyhydraulics.com and select the Company tab, Warranty.

 

(NOTE: T

he warranty Validation record must be submitted to validate the warranty). 

Summary of Contents for BR67























Reviews: