1. By pressing the
AUTO/MAN
button, this allows the
oven to be used with the programmer or used
manually.
2. An LED will display what is currently set.
1. Ensure that the
AUTO
mode is being used when
setting the programmer.
2. Press the
SET
button twice.
3. The display should alternate between
ON1
and the
time of day currently set.
4. Adjust to the time required by using
+
or
-
buttons to
set time you wish cooker to turn on (e.g. morning).
5. Press
SET
once to confirm time.
1. The display should alternate between
OFF 1
and the
time of day currently set.
2. Adjust using
+
or
-
to set the time the cooker is to turn
off.
3. Press
SET
once to confirm.
1. The display should alternate between
ON2
and time of
day currently set.
2. Adjust using
+
or
-
to set the time the second event is
to begin (evening).
3. Press
SET
once to confirm.
4. If the second event is not required, set the time to
00:00 and then press
SET
.
DESN 516001
Fig. 10
SECOND EVENT
9
AUTO/MANUAL CONTROL
Fig. 6
DESN 515997
SETTING THE PROGRAMMER - WEEKLY (1)
Fig. 7
DESN 515998
SETTING THE PROGRAMMER - WEEKLY (2)
Fig. 8
DESN 515999
Fig. 9
DESN 516000
SECOND EVENT
