Stanley DL07, Operation And Service Manual

15

SPECIFICATIONS

Drive Size .......................................................................................................................... 1/2 inch / 1.3 cm 3-Jaw Adjustable

5/8 -16 THD Chuck

Drill Torque ...................................................................................................................20 ft lbs / 27 Nm at 2000 psi / 140 bar
Drill Speed ....................................................................................................................................1000 rpm at 8 gpm / 30 lpm
RPM Range .............................................................................................................................................................. 350-1500
Weight ................................................................................................................................................................. 8 lbs / 3.6 kg
Overall Length ................................................................................................................................................ 9 inch / 22.9 cm
Width ................................................................................................................................................................ 3.5 inch / 9 cm
Motor ............................................................................................................................................................................Integral
Pressure Range............................................................................................................................ 1000-2000 psi / 70-140 bar
Flow Range .................................................................................................................................................4-12 gpm / 30 lpm
Optimum Flow .............................................................................................................................................8 gpm / 15-34 lpm
System Type ............................................................................................... Open and Closed Center, HTMA Type I, II and III
Porting ..............................................................................................................................................................-8 SAE O-Ring
Output Torque ............................................................................................................................................ 500 ft lbs / 675 Nm
Connect Size and Type .................................................................................................................3/8 inch NPT Male Adapter
Sound Power Level ................................................................................................................................................. 87.69 dBA
Vibration Level ................................................................................................................................................................9 m/s

2

TORQUE

HYDRAULIC FLOW

DRILL SPEED

4 ft lbs @ 500 psi / .5 Nm @ 35 bar

3 gpm / 11.3 lpm

350 rpm

9 ft lbs @ 1000 psi / 1.2 Nm @ 70 bar

4 gpm / 15 lpm

475 rpm

14 ft lbs @ 1500 psi / 1.9 Nm @ 105 bar

6 gpm / 23 lpm

750 rpm

19 ft lbs @ 2000 psi  / 2.6 Nm @ 140 bar

8 gpm / 30 lpm

10 gpm / 38 lpm

1000 rpm
1250 rpm

TORQUE AND DRILL SPEEDS