background image

2

3

GENERAL SAFETY WARNINGS AND INSTRUCTIONS

READ ALL INSTRUCTIONS

WARNING: Read all instructions before operating power station. Failure to follow all instructions listed below may

result in electric shock, fire and/or serious injury.

SAFETY GUIDELINES / DEFINITIONS

DANGER: 

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: 

Indicates a potentially hazardous situation which, if not  avoided, could result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION:

Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in

property damage.

RISK OF UNSAFE OPERATION.

When using tools or equipment, basic safety precautions should always be followed to reduce the

risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and
property damage. There are certain applications for which tools and equipment are designed. Manufacturer strongly recommends
that this product NOT be modified and/or used for any application other than for which it was designed. Read and understand all
warnings and operating instructions before using any tool or equipment.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

This product or its power cord contains lead, a chemical known to the State of California to cause cancer and birth

defect or other reproductive harm. Wash hands after handling.

• This unit was designed for household use only.

GENERAL INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, BURST HAZARD, OR
INJURY TO PERSONS OR PROPERTY

WARNING: Read all instructions before operating this unit. Failure to follow all instructions in this manual may

result in electric shock, fire and/or serious injury.
• Avoid dangerous environments. 

Don’t use appliances in damp or wet locations. Don’t use appliances in the rain.

• Keep children away. 

All visitors should be kept at a distance from work area.

• Dress properly.

Do not wear loose clothing or jewelry. They can be caught in moving parts. Rubber gloves and substantial, non-

skid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair.

• Use safety glasses and other safety equipment.

Use safety goggles or safety glasses with side shields, complying with

applicable safety standards. Safety glasses or the like are available at extra cost at your local dealer.

• Store idle appliance indoors. 

When not in use, appliances should be stored indoors in dry, and high or locked-up place – out of

reach of children.

• Don’t abuse cord. 

Never carry appliance by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp

edges.

• Disconnect appliances. 

Disconnect the appliance from the power supply when not in use, before servicing, and when changing

accessories.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not approved by the party responsible for compliance could void user’s authority to operate the
equipment.

FEATURES
CARACTERÍSTICAS

FEATURES

1. Grip handle
2. LCD screen
3. Jump-starter on/off button
4. 120 volt AC power supply on/off button
5. Unit on/off button
6. Area light on/off button
7. Inflator on/off button
8. Inflator pressure control buttons
9. 120 volt AC outlet (under protective cover)

10. LED area light
11. USB charging port (under protective cover)
12. 12 volt DC accessory outlet (under protective cover)
13. Charging port
14. Nozzles
15. 120 volt AC charger
16. Positive (+) Red Clamp
17. Negative (–) Black Clamp
18. Air Hose and Nozzle

CARACTERÍSTICAS

1. Manija
2. Pantalla del LCD
3. Botón con./desc. (on/off) del puente auxiliar de arranque
4. Botón con./desc. (on/off) de la fuente de alimentación de

120 voltios de CA

5. Botón con./desc. (on/off) de la unidad 
6. Botón con./desc. (on/off) de la luz zonal
7. Botón con./desc. (on/off) del inflador
8. Botones del control de presión del inflador
9. Tomacorriente de 120 V de CA (bajo cubierta protectora)

10. Luz del área del LED
11. Puerto de carga del USB (bajo cubierta protectora)
12. Tomacorriente para accesorios de 12 V de CC (bajo cubierta

protectora)

13. Puerta de carga
14. Picos
15. Cargador de la CA de 120 voltios
16. Pinza roja del positivo (+)
17. Pinza negra del negativo (–)
18. Manguera e inyector de aire

15

2

1

14

3

4

5

6

7

8

9

10

11

12

18

13

16

17

DPS109Lowes_ManualENSP_041110.qxp  4/11/2010  5:29 PM  Page 2

Summary of Contents for DPS109













Reviews: