10 ► EP30200
User Manual
PROBLEM
CAUSE
SOLUTION
Brazing pin does not
ignite or does not ignite
long enough.
Batteries not charged or are defective. Test batteries for proper charge. Replace
and/or charge as necessary.
Blown fuse.
Check fuses.
Magnetic ground faulty.
Ensure the grounding surface is clean.
Check magnetic ground cable and plug for
damage.
Faulty cables.
Check gun cables and plugs for damage.
Bonding surface contaminated.
Check that the brazing surface is ground
clean.
Braze is faulty.
Batteries not charged or are defective. Test batteries for proper charge. Replace
and/or charge as necessary.
Incorrect PIN TYPE setting.
Check PIN TYPE setting on the control box.
Magnetic ground faulty.
Ensure the grounding surface is clean.
Check magnetic ground cable and plug for
damage.
Bonding surface contaminated.
Check that the brazing surface is ground
clean.
Incorrect grinding wheel is used.
Use only Tyrolit grinding wheels or carbide
burr.
Ceramic ring was not positioned
square to the lug.
Ensure ring is positioned correctly.
Brazing pin not positioned correctly in
lug hole.
Ensure pin is positioned correctly.
TROUBLESHOOTING
