7
ENGLISH
(Original instructions)
Hints for optimum use
u
Always use the appropriate type of saw blade for the
workpiece material and type of cut.
u
Always hold the tool with both hands.
u
Let the blade run freely for a few seconds before starting
the cut.
u
Apply only a gentle pressure to the tool while performing
the cut.
u
Work with the shoe pressed against the workpiece.
u
As some splintering along the line of cut on the top side of
the workpiece cannot be avoided, cut on the side where
splintering is acceptable.
u
Where splintering is to be minimised, e.g. when cutting
laminates, clamp a piece of plywood onto the top of the
workpiece.
u
Support large panels to minimize the risk of blade pinching
and kickback. Large panels tend to sag under their own
weight.
u
Supports must be placed under the panel on both sides,
near the line of cut and near the edge of the panel being
cut.
u
Never hold piece being cut in your hands or across your
leg.
u
Secure the workpiece to a stable platform using clamps. It
is important to support the work properly to minimize body
exposure, blade binding, or loss of control.
Maintenance
Your Stanley FatMax corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning!
Before performing any maintenance on corded/
cordless power tools:
u
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
u
Or run the battery down completely if it is integral and then
switch off.
u
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
u
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
u
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
plug.
u
Connect the blue lead to the neutral terminal.
Warning!
No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com
Technical data
KFFMES301 (Type 1)
Input voltage
V
Ac
230
Power input
W
1650
No-load speed
Min
-1
5500
Max. depth of cut
mm
66
Blade diameter
mm
190
Blade bore
mm
16
Blade tip width
mm
1.8
Weight
kg
3.9 (4.31 with blade)
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
) 89,0 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 100 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a
h,w
) 2.6 m/s
2
, uncertainty (K) 1.5 m/s
2
(cutting wood)
EC declaration of conformity
MACHINERY DIRECTIVE
%
KFFMES301 - Circular saw
Summary of Contents for Fat Max KFFMES301
