GB
10
• Do not operate the laser in explosive atmospheres, such as
in the presence of flammable liquids, gases, or dust. This tool
may create sparks which may ignite the dust or fumes.
• Store an idle laser out of reach of children and other untrained
persons. Lasers are dangerous in the hands of untrained
users.
•
Tool service MUST be performed by qualified repair
personnel. Service or maintenance performed by unqualified
personnel may result in injury. To locate your nearest Stanley
service center go to http://www.2helpU.com.
• Do not use optical tools such as a telescope or transit to view
the laser beam. Serious eye injury could result.
• Do not place the laser in a position which may cause anyone
to intentionally or unintentionally stare into the laser beam.
Serious eye injury could result.
•
Do not position the laser near a reflective surface which may
reflect the laser beam toward anyone’s eyes. Serious eye
injury could result.
• Store an idle laser out of reach of children and other untrained
persons. Lasers are dangerous in the hands of untrained
users.
• Turn the laser off when it is not in use. Leaving the laser on
increases the risk of staring into the laser beam.
• Do not modify the laser in any way. Modifying the tool may
result in hazardous laser radiation exposure.
• Do not operate the laser around children or allow children to
operate the laser. Serious eye injury may result.
• Do not remove or deface warning labels. If labels are
removed, the user or others may inadvertently expose
themselves to radiation.
• Position the laser securely on a level surface. If the laser falls,
damage to the laser or serious injury could result.
Personal Safety
• Stay alert, watch what you are doing, and use common sense
when operating the laser. Do not use the laser when you are
tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating the laser may result
in serious personal injury.
•
Use personal protective equipment. Always wear eye
protection. Depending on the work conditions, wearing
protective equipment such as a dust mask, nonskid safety
shoes, hard hat, and hearing protection will reduce personal
injury.
Tool Use and Care
• Follow instructions in the Maintenance and Care section of
this manual. Use of unauthorized parts or failure to follow
Maintenance and Care instructions may create a risk of
electric shock or injury.
Keypad and LEDs
Keypad
To reference keypad and LED display, see Figure
Ⓔ①
(RL 600 and RL 600L) or Figure
Ⓔ②
(RL 700L and
RL 750L-G).
Power ON/OFF Key
Tilt Warning ON/OFF Key
Scan Mode Key
RL 700L and RL 750L-G only.
Manual Slope Mode Key
Rotation Speed Key
Up Arrow Key (counterclockwise)
Down Arrow Key (clockwise)
LEDs
Power LED
Solid Green
•
Charging complete.
•
Auto-Levelling Complete.
Flashing Green
•
Laser Tool is Auto-Levelling.
•
In Calibration and/or Default Tilt
Warning Set Up.
Flashing Red
•
Low Battery.
Solid Red
RL 600L, RL 700L,
& RL 750L-G
•
Battery needs recharging, power
supply required.
•
Hot/Cold battery delay or cell
failure. Laser can be operated by
adapter power.
Summary of Contents for Fatmax FMHT77446
