Stanley Fatmax FMXCMS2020TE Instruction Manual For Owner'S Use Download

Page: 21 / 120

Warning!

Dispose of the condensation water in an
environmentally compatible manner at the appropriate
collection point.

8.3 Safety valve (ref. 10)

The safety valve has been set for the highest permitted

pressure of the pressure vessel.

It is prohibited to adjust the safety valve. Actuate the

safety valve from time to time to ensure that it works when

required. Turn the nut until it is completely loose. Then

pull the nut with sufficient force until you can hear the

compressed air being released (Fig. 9). Then release the

nut, and screw it back on.

Always keep the safety valve and the surrounding area

clean and free of obstructions.

8.4

Storage

Warning!

Disconnect the plug from the socket, vent the
appliance and tools connected to it and empty the
condensate.
Switch off the compressor and make sure that it is
secured in such a way that it cannot be started up
again by any unauthorized person.

Warning!

Store the compressor only in a dry location which is
not accessible to unauthorized persons.

Always store upright, never tilted!

Caution!

Always drain the tank before to store compressor in
vertical position.

DISPOSAL AND RECYCLING

Pursuant to Directive 2012/19/EU on

waste electrical and electronic equipment (WEEE).

The symbol carrying a crossed-out refuse container

depicted on any equipment or the relative packaging

means that, at the end of its useful life, said product must

be disposed of separately from other waste.

The user must therefore take said equipment to the

centres specialising in differentiated refuse collection of

electric and electronic equipment or alternatively return

it to the reseller when purchasing a new similar piece of

equipment.

Thanks to differentiated refuse collection, discarded

equipment can be sent to be recycled, treated and disposed

of in an environmentally-friendly manner; this helps

avoiding possible negative effects on the environment
and on health and promotes the re-employment and/or

recycling of the equipment’s materials.

Any unauthorised disposal of the product by the user will

result in the application of the fines provided for by the

regulations in force.

10.

POSSIBLE FAULTS AND RELATED PERMITTED REMEDIES

Fault

Cause

Remedy

The compressor stops and restarts

automatically after a few minutes.

Tripping of the thermal cutout due to

overheating of the motor.

Allow the compressor to cool down.

Ventilate the work area.

After a few attempts to restart, the

compressor stops.

Tripping of the thermal cutout due to
overheating of the motor (removal
of the plug with the compressor

running, low power voltage).

Activate the

I/O

switch (On/Off).

Ventilate the work area. Wait a few

minutes. The compressor will restart

independently.

The compressor does not stop and

the safety valve is tripped.

Irregular compressor operation or

pressure switch malfunction.

Remove the plug and contact the

Service Center.

Any other type of operation must be carried out by authorized Service Centers, requesting original
parts. Tampering with the machine may impair its safety and in any case make the warranty null
and void.