12
ENGLISH
(Original instructions)
Your charger does not require any maintenance apart from
regular cleaning.
Warning!
Before performing any maintenance on corded/
cordless power tools:
u
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
u
Or run the battery down completely if it is integral and then
switch off.
u
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
u
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
from the interior (when fitted).
Protecting the environment
Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
SFMCG400
(H1)
Voltage
V
DC
18
Rated speed
min-
1
9000
Disc diameter
mm
125
Disc bore
mm
22
Max disc thickness
grinding disc
mm
6
cutting disc
mm
3.5
Spindle diameter
M14
Spindle length (with the
inner flange fitted)
mm
14
Spindle length (without the
inner flange fitted)
mm
19.5
Weight
kg
2.2 (without battery)
Charger
SFMCB11
SFMCB12
SFMCB14
Input Voltage
V
AC
230
230
230
Output Voltage
V
DC
18
18
18
Current
A
1.25
2
4
Battery
SFMCB201 SFMCB202
SFMCB204 SFMCB206
Voltage
V
DC
18
18
18
18
Capacity
Ah
1.5
2.0
4.0
6.0
Type
Li-Ion
Li-Ion
Li-Ion
Li-Ion
Level of sound pressure according to EN60745:
Sound pressure (L
pA
) 78 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 89 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN60745:
Surface grinding (a
h, SG
) 6.7 m/s
2
, uncertainty (K) 1.5 m/s
2
Caution!
Applications such as cutting-off or wire brushing may
have different vibration emissions.
