10
ENGLISH
(Original instructions)
To reduce the risk of injury, only STANLEY FATMAX
recommended accessories should be used with this product.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.
u
Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Protecting the environment
Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at
www.2helpU.com
Technical data
SFMCW221
Input voltage
V
dc
18
Oscillations (no load)
min
-1
9000 - 12000
Orbits (no load)
min
-1
9000 - 12000
Paper size
mm
135 x 95
Weight
kg
0.93
Charger
SFMCB11
SFMCB12
SFMCB14
Input Voltage
V
AC
230
230
230
Output Voltage
V
DC
18
18
18
Current
A
1.25
2
4
Battery
SFMCB201
SFMCB202
SFMCB204 SFMCB206
Voltage
V
DC
18
18
18
18
Capacity
Ah
1.5
2.0
4.0
6.0
Type
Li-Ion
Li-Ion
Li-Ion
Li-Ion
Level of sound pressure according to EN62841:
Sound pressure (L
pA
) 74.5 dB(A), Uncertainty (K) 3 dB(A)
Sound power (L
WA
) 85.5 dB(A), Uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN62841:
Sanding (a
h
) 7.8 m/s
2
, uncertainty (K) 1.5 m/s
2
Declaration of Conformity
The Supply of Machinery (Safety) Regulations 2008
SFMCW221 Detail sander
STANLEY FATMAX declares that these products described
under "technical data" are in compliance with:
Equipment Regulations 2012, S.I. 2012/3032 (as amended).
EN62841-1:2015; EN62841-2-4:2014.
These products conform to the following UK Regulations:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended).
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic
For more information, please contact Stanley at the following
address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of STANLEY
FATMAX
Karl Evans
Vice President Professional Power Tools EANZ
STANLEY FATMAX, 270 Bath Road, Slough,
Berkshire, SL1 4DX
United Kingdom
31/08/2021
EC declaration of conformity
MACHINERY DIRECTIVE
%
SFMCW221 Detail sander
STANLEY FATMAX declares that these products described
under "technical data" are in compliance with:
2006/42/EC, EN62841-1:2015; EN62841-2-4:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact STANLEY
FATMAX at the following address or refer to the back of
the manual.
