CAUTION
There is a possibility that it is assumed to owe injury.
●
This product is IP 66.
●
Wind pressure resistance is 60m/s. Risk of product fall.
●
Be sure to turn off the power supply during product installation or removal. There is a possibility that the product is
damaged when the installation or removal of the lighting is done with the power supply turned on. It causes the electric
shock, and a fire.
●
The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 5m is not expected.
●
The surface of the product becomes a high temperature immediately after lighting and turning off. Please note it enough.
●
Please don't use for a hot spring including sulfur constituent. The brightness becomes dark and causes a life expectancy
decline.
●
Please don't install apparatus for the sun. Sunlight concentrates, and an LED is damaged and causes the not lighting and fire.
PART NAME
Cover Glass
(
Fixing Screw, ※Don’t loosen screw)
Housing
Caution, risk of electric shock
The light source and control gear contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
●
When abnormality occurs, turn off the power immediately and contact your distributor for assistance. Continued use of
the product risks electric shock and fire.
●
Do not connect to power source other than specified for the product. –Risk of electric shock, fire and product will not illuminate.
●
Temper Glass may be damaged if a strong shock is applied.
Please be careful handing so that scratches will not be attached when carrying or installing the luminaire.
Terminal Block
For AC
Top Cover
Set Screw M8
For installing pole
Hexagonal Bolt M8 for Safety
(Safety Bolt)
Check The Pole Adapter
Please process according to the following
because it will cause the instrument to fall.
55.5
Φ15 hole
For Safety Bolt
Pole
Control No.
D00191296A
2/7
