© 2005, The STANLEY WORKS. ALL RIGHTS RESERVED.
203936 Rev. C
MA900 Installation Manual
9
Hardware
The installation and mounting hardware kit contains the
following items:
Tools Required
You will need the following tools to install the Stanley MA900:
Riv-nut tool for 1/4-20 Riv-nut and instructions
Digital stopwatch
Force gauge
Number 2 Phillips screwdriver
Small flat-blade screwdriver
3/32” and 3/8” Allen wrenches
Center punch
Hammer
Tape measure
Diagonal cutters (wire strippers)
Step ladder
Electric drill
1/8” drill bit
25/64” drill bit
3/8” drill bit
Tape (for example, electrical tape) to hold template on
door frame
1/2” box-end wrench
5/8” box-end wrench (or adjustable wrench)
Carbide drill bits if the operator is being attached to a
masonry surface.
ALL LABELS
REQUIRED BY
ANSI A156.19
Summary of Contents for MA900n
Page 3: ...MA900 Installation and Owner s Manual 203936 Rev C ...
Page 4: ... 2005 The STANLEY WORKS ALL RIGHTS RESERVED 203936 Rev C MA900 Installation Manual 2 ...
Page 29: ... 2005 The STANLEY WORKS ALL RIGHTS RESERVED 203936 Rev C MA900 Installation Manual 27 Notes ...
Page 30: ... 2005 The STANLEY WORKS ALL RIGHTS RESERVED 203936 Rev C MA900 Installation Manual ...