© 2005, The STANLEY WORKS. ALL RIGHTS RESERVED.
203936 Rev. C
MA900 Installation Manual
26
No • Verify door arm shoe (outswing) or track (inswing)
location and re-install if necessary.
• Verify operator header mounting location and re-
install if necessary.
• Disconnect the door arm from the operator. If door
does not swing freely replace or repair worn or
damaged door components and re-install the
door arm.
The door continues to open and close.
1. Are there any obstructions in the swing path of the door?
(e.g. Rug rubbing on the bottom of the door)
Yes • Remove obstruction.
No • Re-tune the operator.
• Step 2.
2. Does the door fully open when manually operated?
Yes • Step 3.
No • Remove and replace the door arm and re-tune the
operator as described in the manual.
• Step 3.
3. Does the door operate freely when manually opened and
closed?
Yes • Contact your authorized Stanley distributor for
replacement.
No • Verify door arm shoe (outswing) or track (inswing)
location and re-install if necessary.
• Verify operator header mounting location and re-
install if necessary.
• Disconnect the door arm from the operator. If
door does not swing freely replace or repair worn
or damaged door components and re-install the
door arm.
The door is very noisy during operation.
1. Are there any obstructions in the swing path of the door?
(e.g. Rug rubbing on the bottom of the door)
Yes • Remove obstruction.
No • Step 2.
2. Does the door operate freely when manually opened and
closed?
Yes • Contact authorized Stanley distributor for
replacement.
No • Verify door arm shoe (outswing) or track (inswing)
location and re-install if necessary.
• Verify operator header mounting location and re-
install if necessary.
• Disconnect the door arm from the operator. If
door does not swing freely replace or repair worn or
damaged door components and re-install the door
arm.
• Disconnect the door arm from the operator. If door
does not swing freely replace or repair worn out or
damaged components and re-install the door arm as
described in the manual.
The door operates too quickly, too slowly, or
seems to be out of adjustment.
1. Are there any obstructions in the swing path of the door?
(e.g. Rug rubbing on the bottom of the door)
Yes • Remove obstruction.
No • Re-tune the operator.
• Step 2.
2. Does the door fully open when manually operated?
Yes • Step 3.
No • Remove and replace the door arm and re-tune the
operator.
• Step 3.
3. Does the door operate freely when manually opened and
closed?
Yes • Re-tune the operator as described in the manual.
• Contact your authorized Stanley distributor for
replacement.
No • Verify door arm shoe (outswing) or track (inswing)
location and re-install if necessary.
• Verify operator header mounting location and
reinstall if necessary.
• Disconnect the door arm from the operator. If
door does not swing freely replace or repair worn
or damaged door components and re-install the
door arm.
Summary of Contents for MA900n
Page 3: ...MA900 Installation and Owner s Manual 203936 Rev C ...
Page 4: ... 2005 The STANLEY WORKS ALL RIGHTS RESERVED 203936 Rev C MA900 Installation Manual 2 ...
Page 29: ... 2005 The STANLEY WORKS ALL RIGHTS RESERVED 203936 Rev C MA900 Installation Manual 27 Notes ...
Page 30: ... 2005 The STANLEY WORKS ALL RIGHTS RESERVED 203936 Rev C MA900 Installation Manual ...