8.1.2 Disposal:
Remove all spills with inert absorbent material. Ventilate spill area. Place contaminated materials in
a disposable container and dispose in a manner consistent with local regulations.
8.1.3 Protecting the Environment:
Separate collection. This product must not be disposed of with normal waste. Should you find one day that
your product needs replacement, or if it is of no further use to you, do not dispose of it with regular waste.
Make this product available for separate collection. Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution
and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical
products, at municipal waste sites or by the retailer when you purchase a new product. You can check the
location of your nearest authorized repair agent by contacting your local STANLEY Engineered Fastening office
at the address indicated in this manual. Alternatively, a list of authorized repair agents and full details of our
after-sales service and contacts are available on the Internet at: www.StanleyEngineeredFastening.com
8.1.4 Fire:
FLASH POINT: 200°C.
Extinguish with dry, chemical, foam or carbon dioxide. Do not enter confined space without self-contained
breathing apparatus.
8.1.5 Handling
:
Use barrier cream or oil resistant gloves.
8.1.6 Storage:
Undercover and consistent with local regulations for inflammable material.
8.2 MOLY LITHIUM GREASE EP 3753 SAFETY DATA
8.2.1 First Aid
SKIN:
As the grease is completely water resistant it is best removed with an approved emulsifying skin cleaner.
ORAL:
Ensure the individual drinks 30ml Milk of Magnesia, preferably in a cup of milk.
EYES:
Irritant but not harmful. Irrigate with water and seek medical attention.
8.2.2 Protecting the Environment:
Scrape up for incineration or disposal on approved site.
8.2.3 Fire:
FLASH POINT: Above 220°C.
Not classified as flammable.
Suitable extinguishing media: CO2, Halon or water spray if applied by an experienced operator.
8.2.4 Handling:
Use barrier cream or oil resistant gloves.
8.2.5 Storage:
Away from heat and oxidizing agent.
ENGLISH
23
