All brackets are shipped assembled for left hand door. The following adjustments must be
made before installing bracket to top frame.
1.
Using dimensions from the appropriate diagram above, mark four (4) holes on door for door closer and four (4) holes on frame for paral-
lel bracket.
2.
Drill pilot holes in door and frame, drill 7/32” (5.5mm) diameter holes for wood screws or drill and tap #7 (.201” diameter)
for 1/4-20 machine screws.
3.
Mount closer on door using screws provided. SPEED ADJUSTING VALVE MUST BE POSITIONED AWAY
FROM HINGE SIDE.
4.
Refer to the BRACKET ADJUSTMENT section, to adjust bracket for proper hand of door before proceeding to next
step.
5.
Install the Parallel Bracket to frame using screws provided.
6.
Place main arm on closer pinion shaft, see
Arm Mounting Detail
.
Secure tightly with arm screw.
7.
Adjust door’s closing speed and power, see
page 4
.
Notes:
Do not allow door to slam into frame. A standard
closing time from a 90° open position is 5 to 7 seconds - evenly divided between main closing (sweep) speed and latching speed. Adjust
the CLOSING speed first, then adjust the LATCHING speed.
8.
ADJUST BACK CHECK FUNCTION, see
page 4
. This function is essen-
tial to the proper operation of the SUPER RIGID PARALLEL ARM. Use just enough to prevent arm from striking the stop with impact.
9.
Snap pinion cap over shaft at botttom of closer or install (optional) cover, using small screws provided.
HOLD OPEN CONTROL HANDLE
(HOLD OPEN ARM)
Parallel arm (push side) mounting.
RIGHT
HAND
DOOR
LEFT
HAND
DOOR
QDC-30
0
QDC-200
5-1/2
4-3/4
4
3-3/8
2-3/4
2-1/8
2-1/8
2-1/8
(140)
(121)
(102)
(86)
(70)
(54)
(54)
(54)
Door Opening
75°
80°
85°
90°
95°
100°
105°
110°
Dim. A
7-1/8
7-1/8
7-1/8
7-1/8
7-1/8
6-5/8
5-3/4
4-3/4
(181)
(181)
(181)
(181)
(181)
(168)
(146)
(121)
Dim. B
2-15/16
2-15/16
2-15/16
2-15/16
2-15/16
2-15/16
2-15/16
2-15/16
(75)
(75)
(75)
(75)
(75)
(75)
(75)
(75)
Dim. C
12
12
12
12
12
12
12
12
(305)
(305)
(305)
(305)
(305)
(305)
(305)
(305)
Dim. D
Inches (mm)
9-1/8
8-3/8
7-5/8
7
6-3/8
5-3/4
5-1/8
4-3/4
5-1/4
(232)
(213)
(194)
(178)
(162)
(146)
(130)
(121)
(133)
70°
75°
80°
85°
90°
95°
100°
105°
110°
3-5/8
3-5/8
3-5/8
3-5/8
3-5/8
3-1/2
2-7/8
1-7/8
(92)
(92)
(92)
(92)
(92)
(92)
(89)
(73)
(48)
2-7/8
2-7/8
2-7/8
2-7/8
2-7/8
2-7/8
2-7/8
2-7/8
2-7/8
(73)
(73)
(73)
(73)
(73)
(73)
(73)
(73)
(73)
9-1/16
9-1/16
9-1/16
9-1/16
9-1/16
9-1/16
9-1/16
9-1/16
9-1/16
(230)
(230)
(230)
(230)
(230)
(230)
(230)
(230)
(230)
DOOR
SPEED
ADJUSTING
VALVE
STOP
1
-11/16
(42.5)
1
-1/16
(27)
7/16
(11)
3/4
(19)
13/16
(20.5)
A
B
C
D
DOOR
SPEED
ADJUSTING
VALVE
STOP
1
-11/16
(42.5)
1
-1/16
(27)
7/16
(11)
3/4
(19)
13/16
(20.5)
A
B
C
D
Summary of Contents for QDC-200
Page 4: ......
