For RIM applications (2103)
(3) Install Latchbolt Switch Assembly
Q Option Upgrade Kit Installation Instructions
QSRK5267 / QSVK5268 Conversion Kits Page 3 of 3
B
12/4/2008
05269-11-000
REV
DATE
DRWG
* Mount Q Rim Latchbolt Switch
Assembly to chassis with 2 screws
(#8-32MS) provided.
3.1
** Mount Q Vertical Latchbolt Switch
Assembly to chassis with 2 screws
(#8-32MS) provided. Keep existing
cam bracket assembly held in place
while adding this assembly.
3.1
Dress harnesses as
shown, keeping them
clear of moving parts.
Secure harnesses with
cable clamp or tape to
top of chassis.
(4) Reassemble device by reversing steps 1.1 to 1.5
Note: Refer to EXQ trim installation instructions for
wire connections.
3.2
3.2
Q Vertical Latchbolt Switch
Assembly
(wires not shown)
Dress harnesses as
shown, keeping them
clear of moving parts.
Secure harnesses with
cable clamp or tape to
top of chassis.
For Vertical applications (2203, 2703, 2803)
(3) Install Latchbolt Switch Assembly
* Note: Switch leaf should be positioned under
backside of latchbolt when mounted.
RHRB handing is shown.
Mount switch on opposite
side for LHRB.
** Note: Switch leaf should be positioned in
front of rod carriage features when mounted.
Note: ELR assembly is shown as example only.
Q RIM Latchbolt Switch Assembly
(wires not shown)
LHRB handing is shown.
Mount switch on opposite
side for RHRB.
