Stanley SCH12S2K, Original Instructions Manual

(Original instructions)

 ENGLISH

5

5.  Battery tool use and care

a.  Recharge  only  with  the  charger  specified  by  the 

manufacturer.

 A charger that is suitable for one type of 

battery  pack  may  create  a  risk  of  fire  when  used  with 

another battery pack.

b.  Use  power  tools  only  with  specifically  designated 

battery packs.

 Use of any other battery packs may create 

a risk of injury and fire.

c.  When  battery  pack  is  not  in  use,  keep  it  away  from 

other metal objects, like paper clips, coins, keys, nails, 

screws, or other small metal objects, that can make a 

connection from one terminal to another. 

Shorting the 

battery terminals together may cause burns or a fire.

d.  Under abusive conditions, liquid may be ejected from 

the  battery;  avoid  contact.  If  contact  accidentally 

occurs,  flush  with  water.

  If  liquid  contacts  eyes, 

additionally  seek  medical  help.  Liquid  ejected  from  the 

battery may cause irritation or burns.

6.  Service

a.  Have  your  power  tool  serviced  by  a  qualified  repair 

person using only identical replacement parts.

 This will 

ensure that the safety of the power tool is maintained.

 ADDITIONAL POWER TOOL SAFETY WARNINGS

WARNING!

 Additional saf

ety 

warnings for 

drills/screwdrivers

•  Wear ear protectors when impact drilling.

 Exposure to 

noise can cause hearing loss.

•  Use  auxiliary  handles  supplied  with  the  tool.

  Loss  of 

control can cause personal injury.

•  Hold power tool b–y insulated gripping surfaces when 

performing an operation where the cutting accessory   

may contact hidden wiring.

 Cutting accessory  

contacting a "live" wire may make exposed metal parts of 

the power tool "live" and could give the operator an electric 

shock.

•  Hold power tool by insulated gripping surfaces, when 

performing  an  operation  where  the  fastener  may 

contact hidden wiring.

 Fasteners contacting a "live" wire 

may make exposed metal parts of the power tool "live" and 

could give the operator an electric shock.

•  Use  clamps  or  another  practical  way  to  secure  and 

support the workpiece to a stable platform.

 Holding the 

work by hand or against your body leaves it unstable and 

may lead to loss of control.

•  Before drilling into walls, floors or ceilings, check for the 

location of wiring and pipes.

•  Avoid touching the tip of a drill bit just after drilling, as it may 

be hot.

•  The intended use is described in this instruction manual. 

The use of any accessory or attachment or performance of 

any operation with this tool other than those recommended 

in this instruction manual may present a risk of personal 

injury and/or damage to property.

 SAFETY OF OTHERS

•  This  tool  is  not  intended  for  use  by  persons  (including 

children)  with  reduced  physical,  sensory  or  mental 

capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction concerning 

use of the tool by a person responsible for their safety.

•  Children should be supervised to ensure that they do not 

play with the appliance.

Residual risks

Additional residual risks may arise when using the tool which 

may not be included in the enclosed safety warnings. These 

risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations and 

the implementation of safety devices, certain residual risks can 

not be avoided. These include:
•  Injuries caused by touching any rotating/moving parts.

•  Injuries  caused  when  changing  any  parts,  blades  or 

accessories.

•  Injuries caused by prolonged use of a tool. When using any 

tool for prolonged periods ensure you take regular breaks.

•  Impairment of hearing.

•  Health hazards caused by breathing dust developed when 

using your tool (example:- working with wood, especially 

oak, beech and MDF.)

 ELECTRICAL SAFETY

Your charger is double insulated; therefore no earth 

wire is required. Always check that the mains voltage 

corresponds to the voltage on the rating plate. Never 

attempt  to  replace  the  charger  unit  with  a  regular 

mains plug.

•  If the supply cord is damaged, it must be replaced by the 

manufacturer or an authorised STANLEY Service Centre in 

order to avoid a hazard.

 ADDITIONAL SAFETY INSTRUCTIONS FOR

 BATTERIES AND CHARGERS

Batteries

•  Never attempt to open for any reason.

•  Do not expose the battery to water.

•  Do  not  store  in  locations  where  the  temperature  may 

exceed 40 °C.

•  Charge only at ambient temperatures between 10 °C and 

40 °C.

•  Charge only using the charger provided with the tool.

•  When disposing of batteries, follow the instructions given in 

the section "Protecting the environment".

Do not attempt to charge damaged batteries. 

Chargers

•  Use your STANLEY charger only to charge the battery in 

the tool with which it was supplied. Other batteries could 

burst, causing personal injury and damage.