SRP 2240 / 3860
User
Manual ◄ 17
Maintenance:
increased service life
increased function
reduced downtimes
increased reliability
reduced repair costs
– Observe the safety regulations!
– Maintenance work should only be carried out when
the engine is shut off.
– The engine and machine should be cleaned thorougly
before carrying out maintenance work.
– Park the machine on a flat surface and secure it against
rolling away and slipping.
– Ensure that operating materials and replaced parts are
disposed of safely and in an environmentally-friendly
way.
General Information
Maintenance Schedule
Maintenance-
Works
Intervals
Daily
20 h
50 h
100 h
200 h
250 h
400 h
If
Necessary
Clean machine
•
Check engine oil level
1
)
•
Change engine oil
1
)
•
3
)
•
Check the water trap
1
)
Clean engine oil filter
1
)
Clean fuel filter
1
)
•
Change fuel filter
1
)
•
•
•
Check valve clearance
1
)
•
3
)
•
•
3
)
•
Check rubber buffers
•
Check hydraulic oil level
•
Change hydraulic oil
•
Check the hydraulic hose lines ²)
•
Check V-belt
•
3
)
•
Check screwed connections for
tightness
•
3
)
•
1
)See engine operating manual
2
)or annually
3
)for the first time
Check air filter
1
)
Change air filter element
1
)
Exciter: Check oil level
Exciter: Change oil ²)
MAINTENANCE
– Before commencing work on any electrical equipment,
disconnect the battery and cover it with insulating materials.
– Do not exchange «PLUS» and «MINUS» poles on the
battery.
– It is essential that short-circuits be prevented in cables
carrying current.
– Before welding work on the machine disconnect all bat-
tery connections and cables.
– Burn-out lightbulbs in indicator lamps should be
replaced immediately.
– When cleaning the machine with a high-pressure water
jet, do not spray the electrical components directly.
– After cleaning the components, blow-dry them with com-
pressed air in order to prevent surface corrosion.
