background image

2 ► SRP 2240 / 3860 

User Manual

DECLARATION OF CONFORMITY

DECLARATION OF CONFORMITY

ÜBEREINSTIMMUNGS-ERKLARUNG

DECLARATION DE CONFORMITE CEE       

DECLARACION DE CONFORMIDAD

DICHIARAZIONE DI CONFORMITA

Hydraulic Tools

______________________________________________________________________

I, the undersigned:

Ich, der Unterzeichnende:

Je soussigné:

El abajo firmante:

lo sottoscritto:

Weisbeck, Andy

    Surname and First names/Familiennname und Vornamen/Nom et prénom/Nombre y apellido/Cognome e nome

hereby declare that the equipment specified hereunder:, bestätige hiermit, daß erklaren Produkt genannten Werk oder Gerät:,

déclare que l’équipement visé ci-dessous:

,

Por la presente declaro que el equipo se especifica a continuación

:,

Dichiaro che le apparecchiature specificate di seguito:

1.  Category:

      

Compaction Reversable Plate

Kategorie:

Catégorie:

Categoria:

Categoria:

2.

Make/Marke/Marque/Marca/Marca

            

Stanley

3.

Type/Typ/Type/Tipo/Tipo:

       

SRP 22401H, SRP 38601H

4.

Serial number of equipment:

Seriennummer des Geräts:

Numéro de série de l’équipement:

Numero de serie del equipo:

Matricola dell´attrezzatura:

All

5.

Mass/Masse/Masse/Masa/Massa     100 kg / 242 kg

Has been manufactured in conformity with, Wurde hergestellt in Übereinstimmung mit, Est fabriqué conformément 

Ha sido fabricado de acuerdo con, E’ stata costruita in conformitá con 

Directive/Standards

Richtlinie/Standards

Directives/Normes

Directriz/Los Normas

Direttiva/Norme

No.

Nr

Numéro

No

n.

Approved body

Prüfung durch

Organisme agréé

Aprobado

Collaudato

Machinery Directive

2006/42/EG

2006/42/EC

2006/42/CE

2000/14/EG

2000/14/EC

2000/14/CE

2005/88EG

2005/88/EC

2005/88/CE

2004/108/EG

2004/108/EC

2004/108/CE

Self

Self

Self

Self

Self

Self

Self

Self

Self

Self

Self

Self

Measurements:

Messungen

Mesures

Mediciones

Misurazioni   

SRP 2240 Honda

GX120 2.9 kW

SRP 3860 Honda

GX270 6.3 kW

104 dB

105 dB

105 dB*

108 dB*

6.

Special Provisions:

Harmonized standards:

7.  Measurements:  

Measured Sound Power Level

Spezielle Bestimmungen:   

EN 500-1; EN500-4

     Messungen         

Guaranteed Sound Power Level*

Dispositions particulières:                                                                     Mesures              Annex VIII of 2000/14/EC

Provisiones especiales:                                                                        Mediciones          

Disposizioni speciali:                                                                            Misurazioni                                                                                                                                                          

8.

Representative in the Union: 

Patrick Vervier

,

Stanley Dubuis 17-19, rue Jules Berthonneau-BP 3406 41034 Blois Cedex, France.

        Vertreter in der Union/Représentant dans l’union/Representante en la Union/Rappresentante presso l’Unione

Done at/Ort/Fait à/Dado en/Fatto a  Stanley Hydraulic Tools, Milwaukie, Oregon   USA       Date/Datum/le/Fecha/Data 

15-04-2015

Signature/Unterschrift/Signature/Firma/Firma

Position/Position/Fonction/Cargo/Posizione

     Director of Product Development                                                 

Summary of Contents for SRP 2240





























Reviews: