Stanton C.313, User Manual

4

9

CONTROL OVERVIEW

1. CTN/SGL

– Toggles between Continuous and Single play modes.

Continuous mode operates like a normal CD player, playing the entire

disc without stopping.  Single mode only plays one track at a time,

returning to the Cue point when the track is completed.  The LCD will

display “SINGLE” when in that mode.

2. BROWSE 

– This encoder enables you to browse the tracks on your CD

without actually selecting each one as you go down the list. Turn the

encoder to browse, and push on the encoder to select. This function

works with both MP3 and audio discs. 

3. LCD DISPLAY

– Shows various information on the status, modes, and

functions of the unit.

4. FOLDERS

– In the same fashion that you BROWSE (#2) tracks, you

can use this encoder to browse a list of folders. Scrolling the encoder

will browse the list of folders. Pushing the encoder will enter and exit

the folder. Use it together with the BROWSE encoder to browse and

select tracks.

5. TIME

– Switches the time value displayed in the LCD between elapsed

track time, remaining track time, and the total remaining time for the

entire disc.  Markers next to the time readout indicate which of these

modes is enabled.  

6. PITCH RANGE INDICATORS

– Indicates the pitch range in percent as

selected by #8.

7. KEY LOCK BUTTON

– Enables the key lock function, which allows the

tempo or BPM of the music to be altered without affecting the key.

This button is illuminated when enabled.

8. PITCH RANGE BUTTON

– Selects between a pitch range of +/- 8, 16,

25, or 100%. When Playing MP3 files, the range is limited to 8% and

16%.

9. PITCH LOCK BUTTON

– When illuminated, the pitch control is locked

at 0%, regardless of the pitch slider’s position.

FACTORY SETTINGS

To return to factory settings…

• Power off the unit

• Press and hold the CLEAR button as you power up the unit

• The display will read clearALL, release the CLEAR button

WARNING: Restoring factory settings will delete cue point memory.

FADER START

By connecting the CD player to a mixing board that has the fader start fea-

ture, the crossfader will engage playback or cue mode depending on its

location.  If the CD player is connected to the left side of the crossfader,

playback will start once the fader is moved from the left most position

towards the right.  The CD player will re-cue itself when the crossfader is

brought back to the left most position.  Two CD players can be hooked up

in this fashion to work on both sides of the crossfader.

SPECIFICATIONS

1. APPLICATION Model C.313

2. POWER SOURCE

US: 120V, 60Hz, AC 1

5

W

EU:  2

3

0V, 50Hz, AC 1

5

W

JP: 100V, 50

/60

Hz, AC 1

5

W

UK

/AUS

: 240V, 50Hz, AC 1

5

W

3. DIMENSIONS

318 (W)x 358 (D)x 

10

9

.5

 (H) mm

4. WEIGHT

4.

3

 Kgs

5. AUDIO CHARACTERISTICS 

(1) Frequency Response                         20Hz to 20kHz  +0/-1.5 dB

(2) Output Level                                      +6dBV

(3) THD+N                                              <0.015% @ 1kHz

(4) S/N Ratio  (ref: fullscale)                     88dB

6. SEARCHING TIME (TEST DISC: TCD-792)

ITEM

TYPICAL

LIMITS

CONDITION

(1)

Short access time 2sec

4sec

Play next track

(2)

Long access time 4sec

6sec

Track 1 ->Track 20

Track 20 ->Track 1

7. PLAYABILITY

ITEM

TYPICAL

LIMIT

CONDITION

(1)

Interruption

1mm

0.7mm

TCD-725

(2)

Black dot

1mm

0.6mm              TCD-725

(3)

Finger prints

75um

65um

TCD-725

(4)

Eccentricity

140um

140um

TCD-712 W/O TRACK JUMP

(5)

Vertical deviation 1mm

0.5mm

TCD-731R

RELAY PLAY USING TWO PLAYERS

When both CD players are connected to each other via their FADER

START / RELAY jacks, the players can work in unison by playing tracks

one after another from both units.  

• Set both players to single play mode (the SINGLE indicator will be illu-

minated in the LCD displays).

• Begin playback on the first player.

• When the first track ends, playback will automatically start on the sec-

ond player and the first player will automatically enter standby mode.

• When the track on the second player ends, the first player will play the

next track.  The players will continue to perform continuous relay play

until stopped or until the last track is played.

• You can set a cue point on the standby player to jump directly to that

point.

SLEEP

The C.313 will automatically go into sleep mode after 15 minutes of inac-

tivity. Press either the Play or Cue button to wake it up. 

c313_manual.qxd  5/19/06  9:59 AM  Page 4

MP3