background image

4

9

INSTALLING THE RACK EARS

• Installing the Rack Ears

:: STEP 1 ::

Place the unit upside down over a pad, pillow, or towel to avoid damaging the control surface.

:: STEP 2 ::

Align the left rack ear with the screw holes as shown. Use 4 screws to lock the ear in place.

:: STEP 3 ::

Repeat step 2 with the right rack ear. You can now turn the unit over. 

cm205_face.qxd  6/9/06  5:38 PM  Page 4

SPECIFICATIONS

ºC

ºC

MIXER SECTION

FREQUENCY RESPONSE (Line to Master Output)
THD+N (Line)
S/N RATIO: REF TO MAX OUTPUT LEVEL (Dynamic Range)
Noise Floor (Line Input to Any Output) (Unbalanced Out)

 (Line  to Line,Phono to Line,Line to Phono) 

CHANNEL FADER KILL
CROSS FADER KILL

CROSS TALK

Channel EQ

20 Hz to 20 kHz +/- 2 dB
<0.01% at 1 kHz
>90 dB 
< -85 dBV

< -85 dB @ 1 kHz

< -85 dB @ 1 kHz

< -75 dB @ 1 kHz
Hi

+9 dB, -16dB @13HZ

Mid   +9 dB, -23dB @1HZ
Low  +9 dB, -23dB @70HZ

CD SECTION

FREQUENCY RESPONSE (CD to Master Output)
THD+N WITH 20 KHZ LOW PASS FILTER
S/N RATIO:( ref Full-Scale)

20 Hz to 20 kHz +/- 2.0 dB
0.05% at 1 kHz
>85 dB 

MICROPHONE

FREQUENCY RESPONSE  (Mic to Master Output)
THD+N   With 20 kHz Low Pass Filter
Mic EIN:

20 Hz to 20 kHz +/- 2.0 dB
0.05% at 1 kHz
>110 dBV

INPUT/OUTPUT

LINE INPUTS
MIC INPUT
MASTER OUTPUT
RECORD OUTPUT
HEADPHONE OUTPUT

2 x Stereo RCA -14 dBV/nominal input level 18 k Ohm unbalanced
1x TRS -54 dBV/nominal input level 10k Ohm Balanced
2x RCA unbalanced nominal load 10k Ohms
2x RCA unbalanced -10dBV into 10k ohm load 
1x 1/4” Phone Jack Max Load 33 Ohms
1x 1/8” Mini Phone Jack

GENERAL

SYSTEM
DISC LOADING
DISPLAY
PITCH CONTROL RANGE
PITCH BEND
PITCH ACCURACY

Compact Disc Digital Audio
Top Loading
12 Digit LCD Display
/- 8%
+/- 8%
+/-0.15%

PHYSICAL SPECIFICATIONS

DIMENSIONS 
WEIGHT (UNIT)
OPERATING TEMPERATURE
STORAGE TEMPERATURE
POWER SOURCE

440 (W) x 266(D) x110.5(H) mm
4.4 Kgs.
0 ºC to 40 ºC                  
-20  

to 

50 

 

US: 120V, 60Hz, AC 27W
EU: 230V, 50Hz, AC 27W

JPN:100V, 50/60Hz,  AC 27W

AUS:240V, 50Hz, AC 27W
ARG:220V, 50Hz, AC 27W

UK: 240V, 50Hz, AC 27W

REPLACEMENT PARTS

Contact your local reseller to order replacement parts.

ºC

ºC

Summary of Contents for CM.205











Reviews: