background image

IMPORTANT TO SAFETY 

 

1.  Read these Instructions   
2.  Keep these Instructions 
3.  Heed all Warnings 
4.  Follow all Instructions   
5.  Do not use this apparatus near water 
6.  Clean only with dry cloth 
7. Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions. 

8.  Do not install near any heat sources such as radiators, 

hear registers, stoves, or other apparatus (including 
amplifiers) that produce heat. 

9.  Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided plug 
does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet. 

10. Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus. 

11. Only use attachments/accessories specified by the 

manufacturer. 

12.  

Use only with the cart, stand, tripod, 
bracket, or table specified by the 
manufacturer, or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart/apparatus combination to 
avoid injury from tip-over. 

13. Unplug this apparatus during lightning storms or when 

unused for long periods of time. 

14. Refer all servicing to qualified Stanton service center. 

Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or plug 
is damaged, liquid has been spilled or objects have 
fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, 
or has been dropped. 

15. This appliance shall not be exposed to dripping or 

splashing water and that no object filled with liquids 
such as vases shall be placed on apparatus. 

 

 

 

IMPORTANT SAFETY INSTRUCTIONS 

 

CAUTION

 
CAUTION: To reduce the risk of electric shock, do not remove 
the cover (or back). No user-serviceable parts inside. Refer 
servicing to qualified service personnel. 
 

 

 

 
 

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the use to 
the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of electric shock to persons. 

 

 

 
 

The exclamation point within the equilateral triangle is intended to alert the user to the presence of 
important operating and maintenance (servicing) instructions in the literature accompanying the 
appliance. 

 

CAUTION 

 

To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless 

the blades can be fully inserted to prevent blade exposure. 

 

 

 

 

 

 

Summary of Contents for DJLab.2














Reviews: