background image

8

GRIDDLE CARE (NON-CHROMIUM
SURFACES)

It takes very little time and effort to keep the griddle
attractive and performing at top efficiency. If grease is
permitted to accumulate, it will form a gummy cake
and then carbonize into a hard substance which is
extremely difficult to remove. To prevent this
condition, the following suggestions for cleanliness
should be followed:
1. After each use, scrape the griddle with a scraper or

flexible spatula to remove excess fat and food. A
waste drawer is provided for the scrapings. If there
is an accumulation of burned on fat and food, the
griddle should be thoroughly scoured and
reseasoned. Use pumice or griddle stone while
the griddle is warm. Do not use steel wool because
of the danger of steel slivers getting into the food.

2. Daily-use a clean cloth and good non-abrasive

cleaner to clean the stainless steel body of the
griddle. Wipe the polished front with a soft cloth.

3. At least once a day remove the waste drawer and

wash in the same way as an ordinary cooking
utensil. The drawer is removed by pulling forward,
up and out.

GRIDDLE CARE (CHROMIUM SURFACES)

It takes very little time and effort to keep this Industrial
Chromium griddle surface sparkling clean and
performing at top efficiency.  

DO NOT

 allow grease

to accumulate as it will carbonize and become difficult
to remove.  To prevent this condition the following
cleaning suggestions should be followed.
1. Remove excess oil and food regularly with a 4"

(100mm) wide 

Razor Sharp

 type scraper and

wipe surface with a damp cloth if desired.

2. Following the scraping, for end of the day cleaning,

a damp cloth and a non-silicated, non-abrasive,
non-chlorinated cleaner such as Bon-Ami may be
used to wipe surface clean, followed by wiping
with clean wet cloth.

3. Follow steps 2 and 3 from Griddle Care (Non-

Chromium Surfaces).

CAUTION

1.

Never 

use pumice, griddle stones, or abrasives on

the surface.

2.

Never

 strike griddle surface with sharp instrument

or spatula edge.

3.

Never

 use steel wool.

4.

Never

 use commercial liquid grill cleaner on the

griddle surface.

5.

Abusing

 surface voids the warranty.

CHROME-MAX™ GRIDDLE SURFACE LIMITED
WARRANTY EXCLUSIONS

Your Chrome-Max griddle has been designed to give
you many years of cooking reliability and requires
minimum maintenance to keep the chrome surface in
its original condition.  All Chrome-Max griddle surfaces
are warranted for a period of 5 years against
manufacturing defects to the original owner from the
date of installation.  This limited warranty is void if it is
determined by Star Manufacturing International
Incorporated or one of its' authorized representatives
that the chrome surface has been misused or abused
or subjected to the following situations:
1. Improperly installed.
2. By-pass adjustments not set properly on gas units

allowing the appliance to overheat and discolor
the chrome surface. (See by-pass adjustment in
instruction manual supplied with unit.)

3. Incorrect voltage applied to electric Chrome-Max

units allowing the surface to overheat and discolor.

4. The misuse of any instrument or tool which

scratches or makes indentations in the surface
which could cause the surface to peel, flake, or
chip off.

5. The use of any chemical or abrasive cleaning

solution, griddle brick, stone, screen or other
cleaning products which could damage and affect
the performance of the chrome surface.

6. The neglect of daily routine maintenance to the

chromium surface.

RETAIN THIS MANUAL FOR  FUTURE REFERENCE
Part  No.  2M-Z6394

        Rev. A   2/16/04

Summary of Contents for 8G-615MZ












Reviews: