Height
Approximate Weight
(A)
(B) (C)
(D)
Model
Grid
Width
Depth
Closed
Open
Voltage
Wattage
Amps
NEMA
Shipping Installed
No.
Surface (cm)
(cm)
(cm)
(cm)
(kg)
(kg)
CG10I
Iron
16-1/8”
21-1/8”
14-1/4”
28-3/4”
120
1800
15
5-15P
67 lbs.
57 lbs.
120
1800
15
5-20P*
(40.9)
(53.7)
(36.2)
(73)
208/240
1350/1800 6.5/7.5
6-15P
(30.4)
(28.1)
CG14
Alum.
19-5/8”
24-5/8”
14-1/4”
33”
120
1800
15
5-15P
67 lbs.
55 lbs.
120
1800
15
5-20P*
(49.8)
(62.5)
(36.2)
(83.8)
208/240
1350/1800 6.5/7.5
6-15P
(29.5)
(24.9)
CG14I
Iron
19-5/8”
24-5/8”
17-1/4”
36”
208/240
2700/2600 13/15
6-15P
67lbs.
55 lbs.
(49.8)
(62.5)
(43.8)
(91.4)
(29.5)
(24.9)
CG14IGT
Iron
19-5/8”
24-5/8”
17-1/4”
36-1/2”
208/240
2700/3600 13/15
6-15P
67 lbs.
55 lbs.
Grooved
(49.8)
(62.5)
(43.8)
(92.7)
(29.5)
(24.9)
Top Only
CG28I
Iron
31-1/4”
24-5/8”
17-1/4”
36”
208/240
5400/7200 26/30
L6-30P
206 lbs.
171 lbs.
208/240
5400/7200 26/30
6-50P*
(87)
(62.5)
(43.8)
(91.4)
(93.4)
(77.5)
CG28IGT
Iron
31-1/4”
24-5/8”
17-1/4”
36”
208/240
5400/7200 26/30
L6-30P
206 lbs.
171 lbs.
Grooved
208/240
5400/7200 26/30
6-50P*
Top Only
(87)
(62.5)
(43.8)
(91.4)
(93.4)
(77.5)
Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com
Star Manufacturing International Inc. -
10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800
Two-Sided Grills are constructed with an 18 gauge stainless steel body. Cast iron or aluminum grooved platens are standard. A counter bal-
ance mechanism provides easy operation for the top platen. Grilling height between platens is up to 3" with counter balance system pro-
viding 3-4 pounds of pressure to the cooking product placed on bottom platen. Metal sheathed tubular elements shall be provided as stan-
dard. Adjustable non-skid feet shall be standard. Unit shall be provided with pilot light, six foot power cord with Nema rated plug (see spec-
ifications above). Units carry approval of UL, UL Sanitation or UL Canada Standards. Printed in the U.S.A.
PRO-MAX GROOVED TWO-SIDED GRILLS
Models CG10I, CG14, CG14I, CG14IGT, CG28I & CG28IGT
A
B
C
D
*Canadian Requirement
Typical Specifications
Model and Specifications
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star
Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as
a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.
Note: Units weighing more than 80 pounds have standard 4” legs.
S t a r M a n u f a c t u r i n g I n t e r n a t i o n a l , I n c .
