Software Manual
85
mm-tall line of characters. If the spacing is set to 3 mm, the added spacing is omitted and receipts are
correspondingly shorter. But note that the shorter receipts may be harder to read.
■ Print Density
Adjusting the print density allows for adjustment in the level of contrast to compensate for the different
levels of sensitivity of different types and grades of thermal paper. The recommended setting is 100%
(Default).
■ Print Speed
Depending on the application, it may be desirable to slow down the speed of printing. This is typically
done to adjust the quality of print based on the grade and type of paper used. The recommended
settings for most cases “High” (Default).
