– 17 –
(8) Pull out the end of the roll paper towards
you.
(9) Leaving the paper as is, close both the
outer and inner covers. Push both sides of
the printer cover with your hands as shown,
until the printer cover is securely closed.
(10) Cut the portion of the paper that extends
from the front cover.
(11) Press the FEED button to bring up the
leading edge of the roll paper.
Note:
If the leading edge of a label is not
detected after 300 mm or more of the
roll is fed, the printer will determine
that it is out of paper, and will stop.
Redo the loading of the roll paper
from the beginning.
(12) The printer will eject a label as shown.
Caution Symbol
This symbol is placed near the thermal print head to indicate that it may be hot. Never
touch the thermal print head immediately after the printer has been used. Let the
thermal print head cool for a few minutes before touching it.
This symbol is placed near the thermal print head to indicate that it is easily damaged.
Observe the precautions for handling electrostatic sensitive devices.
